Specification; General Safety Rules - Makita BTP130 Betriebsanleitung

ENGLISH
1 Button
2 Red part
3 Battery cartridge
4 Switch trigger
5 Lamp
6 Reversing switch lever
7 Action mode change lever
8 Adjusting ring
9 Graduation
10 Pointer

SPECIFICATION

Impact driver mode
Hammer drill mode
Drill mode
Screw driver mode
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact screw driving in wood and
for impact drilling in brick, concrete and stone as well as
for drilling and screw driving without impact in wood,
metal, ceramic and plastic.
6
Explanation of general view
11 Bit
12 Sleeve
13 Bit-piece
14 Hook
15 Screw
16 Groove
17 Standard bolt
18 Fastening torque
19 Proper fastening torque
20 Fastening time
Model
Max. fastening torque
Capacities
No load speed (min
Impacts per minute
No load speed (min
Blows per minute
Capacities
–1
No load speed (min )
Capacities
No load speed (min
Capacities
Overall length
Net weight
Rated voltage
Machine screw
Standard bolt
High tensile bolt
–1
)
–1
)
Concrete
High (2)
Low (1)
High (2)
Steel
Low (1)
High (2)
Wood
Low (1)
–1
)
Machine screw

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
21 High tensile bolt
22 Limit mark
23 Rear cover
24 Screws
25 Spring
26 Arm
27 Recessed part
28 Carbon brush cap
29 Hole
BTP130 BTP140
135 N•m 140 N•m
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,400 0 – 2,300
0 – 3,200
0 – 2,400 0 – 2,300
0 – 28,800 0 – 27,600
8 mm
0 – 2,400 0 – 2,300
0 – 700
6.5 mm
10 mm
9 mm
21 mm
0 – 2,400 0 – 2,300
M4
186 mm
1.7 kg
D.C. 14.4 V D.C. 18 V
1.8 kg
GEA002-3