Makita GA7020R Bedienungsanleitung Seite 5

Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model GA7040R
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model GA9020R, GA9040R
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
ENG208-4
2
) : 6.5 m/s
h,AG
2
ENG313-2
2
) : 3.5m/s
h,DS
2
ENG102-3
) : 90 dB(A)
pA
) : 101 dB(A)
WA
ENG208-4
2
) : 7.0 m/s
h,AG
2
ENG313-2
2
) : 3.0m/s
h,DS
2
ENG102-3
) : 90 dB(A)
pA
) : 101 dB(A)
WA
ENG208-4
2
) : 6.0 m/s
h,AG
2
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model GA9030R
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
5
ENG313-2
2
) : 2.5m/s
h,DS
2
ENG102-3
) : 90 dB(A)
pA
) : 101 dB(A)
WA
ENG208-4
2
) : 5.5 m/s
h,AG
2
ENG313-2
2
) : 2.5m/s
h,DS
2
ENG902-1