Specifications; Safety Instructions - Makita 6343D Betriebsanleitung

ENGLISH
1 Button
2 Battery cartridge
3 Bit
4 Tighten
5 Sleeve
6 Ring
7 Bit holder
8 Side grip (auxiliary handle)
9 Loosen
10 Teeth

SPECIFICATIONS

Model
Capacities
Steel ............................................................ 13 mm
Wood ............................................................ 38 mm
Wood screw .......................................... 10 x 89 mm
Machine screw ............................................... 6 mm
-1
No load speed (min )
High .......................................................... 0 – 1,400
Low .............................................................. 0 – 450
Overall length ................................................ 255 mm
Net weight (with battery cartridge) ................... 2.5 kg
Rated voltage ...............................................D.C. 18V
• Due to our continuing program of research and
development, the specifications herein are subject
to change without notice.
• Note: Specifications may differ from country to
country.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.

SAFETY INSTRUCTIONS

WARNING! When using battery operated tools
basic safety precautions, including the following,
should be followed to reduce the risk of fire, leak-
ing batteries and personal injury: Read these
instructions before operating this product and
save these instructions.
For safe operation:
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider the work environment.
– Do not expose the tool to rain. Keep work area
well lit. Do not use tools in the presence of
flammable liquids or gases.
3. Keep children away
– Do not let visitors touch the tool. Keep visitors
away from work area.
Explanation of general view
11 Protrusions
12 Depth gauge
13 Thumb screw
14 Switch trigger
15 Reversing switch lever
16 A side
17 B side
18 Clockwise
19 Counterclockwise
20 Low speed
4.
6343D
5.
6.
7.
8.
9.
10. Do not abuse the supply cord (if fitted)
11. Secure the work
12. Do not over-reach
13. Maintain tools with care
21 High speed
22 Speed change lever
23 Adjusting ring
24 Graduations
25 Drill marking
26 Pointer
27 Limit mark
28 Brush holder cap
29 Screwdriver
Store batteries or idle tools
– When not in use, tools and batteries should be
stored separately in a dry, high or locked up
place, out of reach of children.
– Ensure that battery terminals cannot be
shorted by other metal parts such as screws,
nails, etc.
Do not force the tool
– It will do the job better and safer at the rate for
which it was intended.
Use the right tool
– Do not force small tools or attachments to do
the job of a heavy duty tools. Do not use tools
for purposes not intended.
Dress properly
– Do not wear loose clothing or jewellery, they
can be caught in moving parts. Non-skid foot-
wear is recommended when working outdoors.
Wear protecting hair covering to contain long
hair.
Use protective equipment
– Use safety glasses and if the cutting operation
is dusty, a face or dust mask.
Connect dust extraction equipment
– If devices are provided for the connection of
dust extraction and collection ensure these are
connected and properly used.
– Never carry the tool by the cord or yank it to
disconnect from the socket. Keep the cord
away from heat, oil and sharp edges.
– Use clamps or a vice to hold the work. It is
safer than using your hand and it frees both
hands to operate the tool.
– Keep proper footing and balance at all times.
– Keep cutting tools sharp and clean for better
and safer performance. Follow instructions for
lubrication and changing accessories. Inspect
tool cords periodically and if damaged have
repaired by an authorized service facility.
5