Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
Mitsubishi Electric MELSEC FX serie Hardwarehandbuch
  1. Anleitungen
  2. Marken
  3. Mitsubishi Electric Anleitungen
  4. Module
  5. MELSEC FX Serie
  6. Hardwarehandbuch

Mitsubishi Electric MELSEC FX serie Hardwarehandbuch

Vorschau ausblenden Andere Handbücher für MELSEC FX serie:
Inhaltsverzeichnis

Werbung

Quicklinks

Diese Anleitung herunterladen
MITSUBISHI ELECTRIC
MELSEC FX Series
Programmable Logic Controllers
Hardware Manual
FX2N
Art. no.: 066014
10 01 2004
INDUSTRIAL AUTOMATION
MITSUBISHI ELECTRIC
JY992D66301
Version K

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für Mitsubishi Electric MELSEC FX serie

Inhaltszusammenfassung für Mitsubishi Electric MELSEC FX serie

  • Seite 1 MITSUBISHI ELECTRIC MELSEC FX Series Programmable Logic Controllers Hardware Manual FX2N Art. no.: 066014 10 01 2004 INDUSTRIAL AUTOMATION MITSUBISHI ELECTRIC JY992D66301 Version K...
  • Seite 2 Si lors de l’installation des incertitudes persistent, n’hésitez pas à consulter un électricien compétent, • qualifié et formé à l’utilisation des normes électriques locales et nationales. Contactez le représentant le plus proche de MITSUBISHI ELECTRIC si la manipulation ou l’utilisation des API de la série FX vous pose des problèmes.
  • Seite 3 FX2N Series Programmable Controllers Series Programmable Controllers Hardware Manual Manuel du matériel Hardware-Handbuch Manuale hardware Manual de Hardware Manual number : JY992D66301 Manual revision : K Date : January 2004...
  • Seite 4 FX2N Series Programmable Controllers Guidelines for the safety of the user and protection of the FX This manual provides information for the installation and use of the FX . The manual has been written to be used by trained and competent personnel. The definition of such a person or persons is as follows; a) Any engineer who is responsible for the planning, design and construction of automatic equipment using the product associated with this manual should be of a competent nature, (trained and qualified to the local and national standards required to fulfill that role).
  • Seite 5 FX2N Series Programmable Controllers Standards Directives de sécurité pour l’utilisateur et mesures de protection pour les API de la série Le présent manuel contient des informations concernant l’installation et l’utilisation des API de la série FX . Ce manuel a été...

  • Seite 6: Sicherheitsrichtlinien Für Den Anwender Und Schutzmaßnahmen Für Die Fx

    FX2N Series Programmable Controllers Standards Sicherheitsrichtlinien für den Anwender und Schutzmaßnahmen für die FX -SPS Dieses Handbuch enthält Informationen zur Installation und zum Einsatz der FX -SPS. Das Handbuch wurde für geschultes und kompetentes Personal erstellt. Hierbei wird für die Qualifizierung folgende Definition zugrunde gelegt: a) Jeder Techniker, der Anlagen der Automatisierungstechnik unter Einbeziehung des Produktes plant, projektiert und errichtet, sollte diesbezüglich ausreichende Kenntnisse besitzen.
  • Seite 7 FX2N Series Programmable Controllers Direttive di sicurezza per l’utente e misure di sicurezza per il PLC FX Il presente manuale contiene informazioni per l’installazione e l’impiego del PLC FX Il manuale è destinato a personale addestrato e competente. Per la qualifica del personale viene considerata la seguente definizione: a) Ogni tecnico responsabile della pianificazione, progettazione e costruzione di impianti di automazione che impiega il prodotto descritto nel presente manuale dovrebbe avere conoscenze adeguate in merito.
  • Seite 8 FX2N Series Programmable Controllers Standards Instrucciones de seguridad para el usuario y medidas de protección para la unidad PLC- Este manual comprende las informaciones correspondientes para la instalación y el uso de la unidad PLC-FX . El manual ha sido elaborado para un empleo por personal competente y capacitado. Al respecto, se establece la siguiente definición en cuanto a la calificación de los operadores: a) Todo técnico, encargado de la planificación, proyección y construcción de instala-cio-nes de la técnica de automa- tización en función del producto deberá...
  • Seite 9 FX2N Series Programmable Controllers Standards The following FX PLC module conform to the identified standards; Les modules suivants de la série FX2N sont conformes aux normes et critères d'homologation mentionnés. Die folgenden Module der FX -Serie stimmen mit den aufgeführten Normen und Zulassungskriterien überein. I seguenti moduli della serie FX2N sono conformi alle norme ed ai criteri di certificazione esposti.
  • Seite 10 Compliance to EMC directive and LVD directive of the entire mechanical module should be checked by the user / manufacturer. For more details please contact the local Mitsubishi Electric sales site. The following products have shown compliance through direct testing (of the identified standards below) and design analysis (through the creation of a technical construction file) to the European Directive for Electromagnetic Compatibility (89/336/EEC) when used as directed by the appropriate documentation.
  • Seite 11 FX2N Series Programmable Controllers Standards Models : MELSEC FX series manufactured from November 1st, 1995 -8EX-ES, -8EYR-ES, -8EYT-ESS from February 1st, 1996 -8ER-ES, -16EX-ES, -16EYR-ES, -16EYT-ESS from April 1st, 1996 -8ER-ES/UL, -16EX-ES/UL, -16EYR-ES/UL, -16EYT-ESS/UL from -232ADP -485ADP May 1st, 1996 from July 1st, 1996 Harmonized Products...
  • Seite 12 FX2N Series Programmable Controllers Standards The following products have shown compliance through direct testing (of the identified standards below) and design analysis (through the creation of a technical construction file) to the European Directive for Low Voltage (73/23/EEC) when used as directed by the appropriate documentation. Refer to a manual or related material of each product for details concerning products not included below.
  • Seite 13 FX2N Series Programmable Controllers Standards Models : MELSEC FX series manufactured from January 1st, 1996 FX-EPROM-8, FX-EEPROM-8, FX-EEPROM-4, FX-RTC, FX-EEPROM-8C, FX-EEPROM-4C, from July 1st, 1997 FX-EEPROM-16 to March 31st,2002 (compliance with IEC1010-1) from April 1st 2002:Above mentioned products (compliance with EN61131-2) Standard Remark IEC1010-1:1990...
  • Seite 14 FX2N Series Programmable Controllers Standards...
  • Seite 15 FX2N Series Programmable Controllers Introduction Introduction Einleitung Introduzione Introducción Terminal Occupation Klemmen- Assegnazione Ocupaciones Layouts des bornes belegungen dei morsetti de bornas Installation Installation Installation Installazione Instalación Notes Alimentation Spannungs- Alimentazione Alimentación Power supply en tension versorgung della tensione de tensión Inputs Entrées Eingänge...

  • Seite 16: Inhaltsverzeichnis

    FX2N Series Programmable Controllers FX2N Series Programmable Controllers Table of Contents Guidelines of Safety......... ii 6. Outputs ..........6-1 Relay output specification...... 6-1 6.1.1 Reliability tests........6-3 1. Introduction ........1-1 6.1.2 Relay output example ......6-4 Unit Accessories........1-9 Triac (SSR) output specifications ..6-5 World Specification........
  • Seite 17 FX2N Series Programmable Controllers Sommarire Directives de sécurité ......iii 6. Sorties ..........6-1 Caractéristiques techniques des sorties des relais........6-1 1. Introduction ........1-1 6.1.1 Contrôles de fiabilité ......6-3 Accessoires d’un appareil...... 1-9 6.1.2 Exemple d’un câblage de sortie Version internationale......1-9 de relais ..........
  • Seite 18 FX2N Series Programmable Controllers FX2N Series Programmable Controllers Inhaltsverzeichnis Sicherheitsrichtlinien....... iv 6. Ausgänge ........6-1 Technische Daten der Relais- Ausgänge..........6-1 1. Einleitung .........1-1 6.1.1 Zuverlässigkeitsprüfungen....6-3 Zubehör einer Geräteeinheit....1-9 6.1.2 Beispiel einer Relais-Ausgangs- Weltweite Ausführung......1-9 beschaltung ........6-4 Geratetypenbezeichnung ....
  • Seite 19 FX2N Series Programmable Controllers Indice Direttive di sicurezza........ v 6. Uscite ..........6-1 Dati tecnici delle uscite a relè ....6-1 6.1.1 Controlli di affidabilità......6-3 1. Introduzione ........1-1 6.1.2 Esempio del cablaggio di uscita Accessori di un apparecchio....1-9 di un relè...
  • Seite 20 FX2N Series Programmable Controllers FX2N Series Programmable Controllers Contenido Instrucciones de Seguridad ....vi Unidades bas con Entradas de 110V CA ........... 5-6 5.2.1 Datos técnicos de las entradas 1. Introducción........1-1 para 110 V CA ........5-7 Accesorios de una unidad 5.2.2 Ejemplo de cableado ......

  • Seite 21: Eng

    FX2N Series Programmable Controllers Introduction 1 Introduction Introduction Introduction This ma nu al covers the h ardware insta lla tio n Le présent manuel comprend la description de instructions for the following programmable logic l’installation pour les automates programmables controller (PLC) product ranges; (API) suivants: base and extension units Appareils de base et appareils d’extension...
  • Seite 22 FX2N Series Programmable Controllers Introduction 1 Powered extension units Table 1.3: Appareils d’extension alimentés en tension Spannungsversorgte Erweiterungsgeräte Apparecchi di ampliamento con alimentazione di tensione Unidades de ampliación con alimentación de tensión INPUTS OUTPUT TYPE MASS POWER DIMENSIONS...
  • Seite 23 FX2N Series Programmable Controllers Introduction 1 ENG Dimensioned unit Dimensions Figure 1.1: GER Abmessungen Dimensioni Dimensiones 350(13.78") 90(3.55") 27.3(1.08") 87(3.43") 130(5.12") DIN rail: 35mm(1.37") 27.3(1.08") UNITS: mm(inches) ENG Extension block dimensions Figure 1.2: Dimensions des modules d’extension GER Abmessungen der Erweiterungsmodule Dimensioni dei moduli di ampliamento Dimensiones de los módulos de ampliación...
  • Seite 24 FX2N Series Programmable Controllers Introduction 1 ENG Expansion board and communication adapter Table 1.5: FRE Adaptateur d'interface, adaptateur d'allocation de valeur de consigne analogique et modules de communication GER Schnittstellenadapter, analoger Sollwertvorgabe-Adapter und Kommunikationsmodule ITL Adattatore di interfaccia, adattatore analogico dei valori reali programmati e moduli di comunicazione ESP Adaptador de interfaz, adaptador análogo de indicación de valor nominal y módulos de comunicación NUMBER POWER SUPPLY...
  • Seite 25 FX2N Series Programmable Controllers Introduction 1 Special function blocks/Expansion board FRE Modules spéciaux Table 1.6: Sondermodule Moduli speciali Módulos especiales blocks NUMBER POWER SUPPLY DIMENSIONS MASS OF I/O MODEL DESCRIPTION (WEIGHT) Internal External (inches) kg (lbs) 5V DC 24V DC Analog/Digital converter...
  • Seite 26 FX2N Series Programmable Controllers Introduction 1 *1 Internal 24V DC *5 The value depends on the switch setting (32, 64, 96 or 128 points). However, the number of *2 FX -10PG inputs and outputs need to be connected master blocks can be arbitrary as supplied from external power supply.
  • Seite 27 FX2N Series Programmable Controllers Introduction 1 *1 Interne 24 V DC *5 Der Wert hängt von der Einstellung der Schalter ab (32, 64, 96 oder 128 Adr.). Die *2 Die Ein- und Ausgänge des FX -10PG Anzahl der installierbaren Master-Module müssen von extern mit Spannung versorgt wird jedoch durch den Adressbereich der werden.
  • Seite 28 FX2N Series Programmable Controllers Introduction 1 *1 24 V DC internos *5 El valor depende del ajuste del interruptor (32, 64, 96 ó 128 direcciones). La cantidad de *2 Las entradas y salidas del FX2N-10PG deben m ó d u l o s m a e s t r o s a i n s t a l a r e s t á s i n alimentarse con tensión eléctrica externa.

  • Seite 29: Unit Accessories

    FX2N Series Programmable Controllers Introduction 1 Unit Accessories Unit Accessories Accessoires d’un appareil Each powered extension unit comes with: 1 I/O label Etendue de la fourniture d’un appareil d’extension kit and a 55mm (2.17 inch) extension cables. alimenté en tension: 1 jeu d’auto-collants E/S et le Each extension and special function block comes câble d’extension de 55 mm de long.

  • Seite 30: Model Name

    FX2N Series Programmable Controllers Introduction 1 Model name Model name Designation des types d'appareils. Gerätetypenbezeichnung Designazione dei modelli. Designacion del tipo de unidad ENG Model table Description des types Table 1.9: GER Typenbeschreibung Descrizione dei modelli ESP Descripción del tipo PLC type, FX, Série d’API: FX,...

  • Seite 31: Serial Number

    FX2N Series Programmable Controllers Introduction 1 Table 1.10: Model ✔ ✔ -**MR-DS, **MT-DSS ✘ ✔ -**M*-E/UL ✘ ✔ -16EYS ENG Model name Figure 1.3: - 1 6 E S / Désignation des types d’appareils. GER Typenbezeichnung Modello. Designación del tipo Serial numbers Serial number...

  • Seite 32: Configuration

    FX2N Series Programmable Controllers Introduction 1 Configuration Configuration Struttura del sistema Configuration du système Configuración del sistema Systemaufbau ENG Schematic system Figure 1.5: Représentation schématique de la construction du système GER Schematischer Systemaufbau Struttura schematica del sistema Configuración esquemática del sistema FX-EEPROM-4 FX-EPROM-8...
  • Seite 33 FX2N Series Programmable Controllers Introduction 1 ENG Configuration notes FRE Description de la configuration Table 1.12: GER Konfigurationsbeschreibung Descrizione della configurazione ESP Descripción de la configuración Unidad base de Appareils de base Apparecchio base MPU - base unit SPS-Grundgerät mando de memoria (Main Processing Unit)

  • Seite 34: Rules

    FX2N Series Programmable Controllers Introduction 1 ENG Connection ports FRE Interfaces Table 1.13: GER Schnittstellen Interfaccia ESP Interfaces Connection to Connexion avec Verbindung mit Allacciamento con Conexión con Raccordement de Collegamento BUS Conexión de bus ➀...
  • Seite 35 FX2N Series Programmable Controllers Introduction 1 Regole base sulla struttura del sistema1.5.1 Reglas básicas para la configuración del sistema 1.5.1 Sono consentiti max. 8 moduli speciali per ogni sistema. Po r c a d a s i s te m a s o n a d m is ibl e s 8 m ó d u lo s Verificate il carico sul BUS a 5 volt.
  • Seite 36 FX2N Series Programmable Controllers Introduction 1 Table 1.17: BLOCK X030 - X000 - X027 No.0 X037   OUT 0 Ž  POWER 4 5 6 22 23 24 25 26 Œ 12 13 POWER POWER POWER POWER BATT.V No. 0 PROG.E 4 5 6 22 23 24 25 26...

  • Seite 37: Terminal Layouts

    FX2N Series Programmable Controllers Terminal layouts 2 Terminal layouts Terminal layouts The following selection of terminal layouts are taken from the FX product range. Note: All layouts are schematic only and are only intended to aid in the creation of wiring diagrams. Some units over 80 I/O do not conveniently fit on the page, hence the terminal rails have been split to suit.

  • Seite 38: Relay Out, 24V Dc Input Mpu's - Main Processing Unit (Base Units)

    FX2N Series Programmable Controllers Terminal layouts 2 Relay output, 24V DC input MPU's - Main Processing Unit (base units) Relay out, 24V DC input MPU’s - Main Processing Unit (base units) Appareils de base avec sorties de relais et entrées 24V CC Grundgeräte mit Relais-Ausgängen und DC 24V-Eingängen Apparecchi base con uscite relè...

  • Seite 39: Transistor Output, Mpu's - (Base Units)

    FX2N Series Programmable Controllers Terminal layouts 2 Transistor output, MPU's - (base units) Transistor output, MPU’s - (base units) Appareils de base avec sorties de transistor Grundgeräte mit Transistor-Ausgängen transistor Apparecchi base con uscitea Unidades base con Salidas transistorizadas - 1 6 M T - E S S / U L - 3 2 M T - E S S / U L Y 1 0 Y 1 2 Y 1 4 Y 1 6...

  • Seite 40: Powered Extension Units

    FX2N Series Programmable Controllers Terminal layouts 2 Powered extension units Powered extension units Appareils d’extension alimentés en tension Spannungsversorgte Erweiterungsgeräte Apparecchi di ampliamento con alimentazione di tensione Unidades de ampliación con alimentación de tensión S / S X 0 X 2 X 4 X 6 X 0 X 2 X 4 X 6...

  • Seite 41: Fx0N Extension Blocks

    FX2N Series Programmable Controllers Terminal layouts 2 Extension blocks Extension blocks Modules d'extension FX Erweiterungsmodule FX Moduli di ampliamento FX Modulos de ampliacion FX S / S C O M 1 + V 0 + V 1 C O M 2 - 1 6 E X - E S / U L - 1 6 E Y T - E S S / U L - 1 6 E Y R - E S / U L...

  • Seite 42: Ac 110V Input, Mpus - (Base Units)

    FX2N Series Programmable Controllers Terminal layouts 2 AC 110V Input, MPUs - (base units) AC 110V Input, MPUs - (base units) Appareils de base avec entrées 110V CA Grundgeräte mit AC 110V-Eingängen Apparecchi base con ingressi 110V CA Unidades base con Entradas de 110V CA X 1 0 X 1 2 X 1 4...

  • Seite 43: Installation

    FX2N Series Programmable Controllers Installation 3 Installation Installation Installation The installation of FX products has been designed Les appareils FX ont été conçus de manière à to be safe and easy. When the products associated per mettre une installation simple et sûre. Les with this manual are used as a system or individually, ap p a reils d o iven t ê...

  • Seite 44: Product Outline

    FX2N Series Programmable Controllers Installation 3 Product outline Product outline Descrizione dell’apparecchio Description de l’appareil Descripción de las unidades Gerätebeschreibung ENG FRE Description de l’API FX Figure 3.1: Features of the FX GER Descrizione dell’FX Beschreibung der FX -PLC ESP Descripción de la FX -PLC...
  • Seite 45 FX2N Series Programmable Controllers Installation 3 ENG Feature table FRE Vue d’ensemble des composants Table 3.1: GER Übersicht der Komponenten Componenti ESP Vista de conjunto de los componentes Barra DIN Carril de montaje DIN rail 35mm (1.37 Rail DIN (35 mm) selon DIN-Schiene (35mm) (35mm)secondo...

  • Seite 46: Run/Stop Control

    FX2N Series Programmable Controllers Installation 3 RUN/STOP Control RUN/STOP Control RUN or STOP of the FX can be controlled by: ➀ The RUN/STOP switch mounted next to the programming port. ➁ A standard input (X0 to X17; X0 to X7 for FX -16M✩...

  • Seite 47: Commande Run/Stop

    FX2N Series Programmable Controllers Installation 3 Commande Run/Stop La fonction RUN ou STOP de la FX peut être commandée: ➀ au commutateur RUN/STOP installé à côté du port de programmation; ➁ au moyen d’une entrée standard (X0 à X17; X0 à X7 pour des unités FX -16M✩) définie par des paramètres système;...

  • Seite 48: General Specifications

    FX2N Series Programmable Controllers Installation 3 General specifications General specifications Specifica generale Caractéristiques générales Especificación general Umgebungsbedingungen ENG General specifications FRE Caractéristiques générales Table 3.3: GER Umgebungsbedingungen Specifica generale ESP Especificación general SPEC 0 - 55 °C Operating Température de Temperatura di...
  • Seite 49 FX2N Series Programmable Controllers Installation 3 ENG General specifications FRE Caractéristiques générales Table 3.3: GER Umgebungsbedingungen Specifica generale ESP Especificación general SPEC Résistance Isolations- Resistenza di Resistencia de Insulation resistance d’isolement: widerstand: isolamento: aislamiento: 500V DC @ tested between all Contrôle entre Prüfung zwischen...

  • Seite 50: Plc Mounting Arrangements

    FX2N Series Programmable Controllers Installation 3 PLC mounting arrangements PLC mounting arrangements Montage de l’API To prevent a rise in temperature, mount the units to Les appareils doivent être montés sur le panneau walls. Never mount them to the floor or ceiling of an arrière de l’armoire électrique pour empêcher une enclosure.
  • Seite 51 FX2N Series Programmable Controllers Installation 3 Caution • Units should not be installed in areas subject to the following conditions: excessive or conductive dust, corrosive or flammable gas, moisture or rain, excessive heat, regular impact shocks or excessive vibration. • Take special care not to allow debris to fall inside the unit during installation e.g.
  • Seite 52 FX2N Series Programmable Controllers Installation 3 Attenzione • Gli apparecchi non devono essere installati in ambienti di lavoro in cui si possono riscontrare le seguenti condizioni ambientali: polvere eccessiva o conduttrice di corrente, gas aggressivi, umidità o pioggia, calore eccessivo, urti continui o vibrazioni eccessive.

  • Seite 53: Din Rail Mounting

    FX2N Series Programmable Controllers Installation 3 DIN rail mounting DIN rail mounting Montage de l’appareil sur rail DIN Units can be ‘snap’ mounted on to 35mm (1.37 inch) L e s a p p a r e i l s p e u v e n t ê t r e m o n t é s “ p a r DIN rail.

  • Seite 54: Direct Mounting

    FX2N Series Programmable Controllers Installation 3 Direct mounting Direct mounting Montage direct -10GM and FX -20GM can only mount on the Le FX2N-10GM et le FX2N-20GM peuvent être DIN rail. montés seulement sur un rail DIN. Direkte Montage Montaggio diretto Das FX -10GM und das FX -20GM können nur...

  • Seite 55: General Notes

    FX2N Series Programmable Controllers Installation 3 Hole positions FRE Positions des trous Table 3.4: Lochpositionen Posizioni dei fori Posiciones de los agujeros inches UNIT ± 0.2 ± 0.01 D = W-8mm(0.32") -8AD 2.64 E = W-24.5mm(0.97") -232ADP, FX -485ADP 65.5 2.58...

  • Seite 56: Extension Board Installation

    FX2N Series Programmable Controllers Installation 3 Extension Board Installation Extension Board Installation Installation de la carte d’extension To install a special function extension board on the Pour installer une car te d’extension à fonctions left side of the FX MPU: spéciales du côté...
  • Seite 57 FX2N Series Programmable Controllers Installation 3 Figure 3.4: Instalación de la tarjeta de extensión3.8 Para instalar una tarjeta de extensión funcional especial en el lado izquierdo del FX MPU se ➃ debe: ➀ Quitar la tapa del FX ➁ Fijar tarjeta conector colocar...

  • Seite 58: Extension Units/Blocks Installation

    FX2N Series Programmable Controllers Installation 3 Extension Units/Blocks Installation Extension Units/Blocks Installation Installation d'extensions Install/remove extension module as shown in the Installez et désinstallez les appareils d'extension et figure 3.5. les modules spéciaux comme indiqué sur la Fig. 3.5 : ➀...

  • Seite 59: Wiring Techniques

    FX2N Series Programmable Controllers Wiring techniques 4 Wiring techniques Wiring techniques The wiring of FX products has been designed to be safe and easy. If during the installation of these product or associated products concern is felt, please contact a professional electrician who is trained to the local and national standards applicable to the installation site.

  • Seite 60: Instructions Relatives Au Cablage

    FX2N Series Programmable Controllers Wiring techniques 4 Instructions relatives au cablage • Ne transmettez pas ensemble des signaux d’entrée et de sortie sur un même câble multiconducteur ou par la même ligne de signalisation. • Ne posez pas de câble de signalisation E/S à proximité de câbles de puissance ou dans un caniveau à câble commun.
  • Seite 61 FX2N Series Programmable Controllers Wiring techniques 4 Avvertenze per il cablaggio • Non mettete insieme i segnali degli ingressi e delle uscite in un cavo multipolare o nella stessa linea di controllo. • Non posate i cavi dei segnali I/O in prossimità dei cavi di potenza o in una canalina comune. I cavi dibassa tensione devono essere separati o isolati in modo sicuro ai cavi di alta tensione.

  • Seite 62: Termination At Screw Terminals

    FX2N Series Programmable Controllers Wiring techniques 4 Termination at screw terminals Termination at screw terminals Terminal screws should be tightened to between 0.5 and 0.8 N·m. Terminal screws must be secured to prevent a loose connection thus avoiding a malfunction. The terminal screws for the FX Series PLC are M3.0.
  • Seite 63 FX2N Series Programmable Controllers Wiring techniques 4 Conexión de bornas roscadas Los bornes atornillados deben apretarse con un momento de torque de 0,5 a 0,8 Nm. Debido a bornes atornillados mal torqueados pueden acontecer fallas de función. Los bornes atornillados de la serie FX2N poseen un tornillo M3, el FX0N-32NT-DP así como los módulos de conexión poseen una rosca M3,5.
  • Seite 64 FX2N Series Programmable Controllers Wiring techniques 4 ENG Crimp Terminals for M3.5 Screws Figure 4.4: Cosse de câble avec raccordement serti pour vis M3,5 GER Kabelschuhe mit Quetschanschluss für M3,5-Schrauben Capocorda con collegamento a scatto per viti M3,5 Manguitos de cable con conexión de apriete para tornillos M3,5 φ...

  • Seite 65: Power Supply

    FX2N Series Programmable Controllers Wiring techniques 4 Power supply Power supply When wiring AC supplies the ‘Live’ cable should be connected to the ‘L’ terminal and the ‘Neutral’ cable should be connected to the ‘N’ terminal. When wiring DC supplies the ‘positive’ cable should be connected to the ‘+’ terminal and the negative cable should be connected to the ‘-’...

  • Seite 66: Spannungsversorgung

    FX2N Series Programmable Controllers Wiring techniques 4 Spannungsversorgung Beim Anschluß einer Wechselspannung (AC) müssen der L-Leiter an die L-Klemme und der N-Leiter an die N-Klemme angeschlossen werden. Beim Anschluß einer Gleichspannung (DC) müssen der positive Leiter an die (+)-Klemme und der negative Leiter an die (-)-Klemme angeschlossen werden.

  • Seite 67: Alimentación De Tensión

    FX2N Series Programmable Controllers Wiring techniques 4 Alimentación de tensión Al conectar una tensión alterna (CA), los conductores L se tienen que conectar en la borna L y el conductor N en la borna N. En la conexión de una tensión continua (CC), el conductor positivo se tiene que conectar en la borna (+) y el conductor negativo en la borna (-).
  • Seite 68 FX2N Series Programmable Controllers Wiring techniques 4 ENG Power requirements (all FX Table 4.1: -✩✩M/E type units) FRE Alimentation en tension (tous les appareils FX -✩✩M/E) GER Spannungsversorgung (alle FX -✩✩M/E-Geräte) Alimentazione della tensione (tutti gli apparecchi FX -✩✩M/E) ESP Alimentación de tensión (todas las unidades FX -✩✩M/E)
  • Seite 69 FX2N Series Programmable Controllers Wiring techniques 4 ENG Power connection diagram FRE Raccordement de la tension Table 4.2: GER Spannungsanschluß Allacciamento della tensione ESP Conexión de tensión Grounding Mise à la terre Erdung Terra Puesta a tierra (max.

  • Seite 70: Earthing/Grounding

    FX2N Series Programmable Controllers Wiring techniques 4 Earthing/Grounding Earthing/Grounding (AWG14) to ground equipment. Ground resistance must be less than 100 Ω. Note that the Use a cable at least 2mm ground cable must not be connected to the same ground as the power circuits. Mise à...

  • Seite 71: Service Power Supply

    FX2N Series Programmable Controllers Wiring techniques 4 Service power supply Service power supply If the system being installed uses the service supply from both the PLC and a powered extension block , then the 0V terminals should be linked. • DO NOT however, link the 24V terminals.
  • Seite 72 FX2N Series Programmable Controllers Wiring techniques 4 ENG Service Supply (all FX Table 4.3: -✩✩M/E-ES/ESS type units) FRE Tension de service (tous les appareils FX -✩✩M/E-ES/ESS) GER Service-Spannung (alle FX -✩✩M/E-ES/ESSGeräte) Tensione di servizio (tutti gli apparecchi FX -✩✩M/E-ES/ESS) ESP Tensión de servicio (todas las unidades FX -✩✩M/E-ES/ESS)

  • Seite 73: Inputs

    FX2N Series Programmable Controllers FX2N Series Programmable Controllers Inputs 5 Inputs Inputs Entrées Eingänge Ingressi Entradas 24V DC input specifications 24V DC input specifications Caractéristiques techniques des entrées pour 24 V CC Technische Daten der Eingänge Dati tecnici degli ingressi per 24 V für 24 V DC Datos técnicos de las entradas para 24 V CC...

  • Seite 74: Typical Wiring

    FX2N Series Programmable Controllers Inputs 5 5.1.1 Typical wiring Typical wiring 5.1.1 Exemple de câblage 5.1.1 Verdrahtungsbeispiel 5.1.1 Ejemplo de cableado 5.1.1 Esempio di cablaggio 5.1.1 ENG Source (positive input connection, negative S/S) Figure 5.1: Source (émetteur) (pôle positif) GER Source (plusschaltend) Source (comando positivo) Source (conexión de positivo)

  • Seite 75: Input Circuit Connection

    FX2N Series Programmable Controllers Inputs 5 ENG Item check FRE Description du poste Table 5.2: GER Positionsbeschreibung Descrizione della posizione ESP Descripción de posición REF. Tension de service DC-Service- Tensione di servizio Tensión de servicio –...

  • Seite 76: Diodes And Inputs Connected In Series

    FX2N Series Programmable Controllers Inputs 5 External supply Alimentation externe The example shown right, uses an external power L’exemple de droite montre l’utilisation d’une tension supply to activate the inputs de service externe pour activer les entrées. Externe Versorgung Alimentazione esterna Das rechte Beispiel zeigt den Einsatz einer externen L’esempio a destra indica l’impiego di una tensione di Versorgungsspannung zu Aktivierung der Eingänge.

  • Seite 77: Resistors And Inputs Connected In Parallel

    FX2N Series Programmable Controllers Inputs 5 5.1.4 Resistors and inputs connected in parallel Resistors and inputs connected in Résistance et entrée montées en parallèle5.1.4 parallel 5.1.4 = 1 5 k Ω. U n e R é s i s t a n c e p a ra l l è l e R p : F X résistance Rb complémentaire doit être mise en Parallel resistance Rp: FX = 15kΩ.

  • Seite 78: Ac 110V Input, Mpus

    FX2N Series Programmable Controllers Inputs 5 AC 110V Input, MPUs AC 110V Input, MPUs Appareils de base avec entrées 110V Grundgeräte mit AC 110V-Eingängen5.2 Apparecchi base con ingressi 110V Unidades bas con Entradas de 110V ENG FX Table 5.3: -✩✩MR-UA1/UL input specification FRE Caractéristiques des entrées FX -✩✩MR-UA1/UL GER Kenndaten der FX...

  • Seite 79: Ac Input Specifications

    FX2N Series Programmable Controllers Inputs 5 5.2.1 110V AC input specifications 110V AC input specifications 5.2.1 Caractéristiques techniques des entrées pour 110 V CA 5.2.1 Technische Daten der Eingänge für AC 110 V 5.2.1 Dati tecnici degli ingressi per 110 V AC5.2.1 Datos técnicos de las entradas para 110 V 5.2.1...

  • Seite 80: Typical Wiring

    FX2N Series Programmable Controllers Inputs 5 5.2.2 Typical wiring Typical wiring 5.2.2 Exemple de câblage 5.2.2 Verdrahtungsbeispiel 5.2.2 Esempio di cablaggio 5.2.2 Ejemplo de cableado 5.2.2 ENG Typical wiring Exemple de câblage Figure 5.5: GER Verdrahtungsbeispiel Esempio di cablaggio Ejemplo de cableado Item check FRE Description du poste...

  • Seite 81: Programming Caution

    FX2N Series Programmable Controllers Inputs 5 5.2.3 Programming caution Programming caution 5.2.3 Instructions relatives à la programmation5.2.3 When using 110V AC units, high speed counter and Lorsque vous utilisez un appareil pour 110 V CA, interrupt routines are not suitable for use due to the n’utilisez ni le High-Speed-Counter (compteur grande long ‘ON/OFF’...
  • Seite 82 FX2N Series Programmable Controllers Inputs 5 MEMO 5-10...

  • Seite 83: Outputs

    FX2N Series Programmable Controllers Outputs 6 Outputs Outputs Sorties Ausgänge Uscite Salidas Relay output specification Relay output specification Caractéristiques techniques des sorties des relais Technische Daten der Relais-Ausgänge Dati tecnici delle uscite a relè Datos técnicos de las salidas de relé ENG FX Table 6.1: relay specification...
  • Seite 84 FX2N Series Programmable Controllers Outputs 6 ENG FX Table 6.1: relay specification FRE Caractéristiques des relais FX GER Kenndaten der Relais, FX ITL Parametri dei relè, FX ESP Características de los relés, FX ∞ Y0 $ $ $ $ Internal Output protection None Protection interne de la sortie...

  • Seite 85: Reliability Tests

    FX2N Series Programmable Controllers Outputs 6 6.1.1 Reliability tests Reliability tests 6.1.1 The test results in table 6.2 were gathered from a 1 sec ON/OFF test cycle. Please note that the over current induced by in-rush greatly reduces the relay contacts service life. The rated life for an inductive AC load such as a contactor or solenoid valve is 500,000 operations at 20VA.

  • Seite 86: Relay Output Example

    FX2N Series Programmable Controllers Outputs 6 6.1.2 Relay output example Relay output example 6.1.2 Exemple d’un câblage de sortie de relais 6.1.2 Beispiel einer Relais-Ausgangsbeschaltung 6.1.2 Esempio del cablaggio di uscita di un relè 6.1.2 Ejemplo de una conexión de salida de relé 6.1.2 Typical wiring Exemple de câblage...

  • Seite 87: Triac (Ssr) Output Specifications

    FX2N Series Programmable Controllers Outputs 6 Triac (SSR) output specifications Triac (SSR) output specifications Caractéristiques techniques des sorties triac (SSR) Technische Daten der Triac(SSR)-Ausgänge Dati tecnici delle uscite triac(SSR) Datos técnicos de las salidas Triac(SSR) ENG FX FRE Caractéristiques des triac FX Table 6.4: triac specification GER Kenndaten der Triac, FX...
  • Seite 88 FX2N Series Programmable Controllers Outputs 6 ENG FX FRE Caractéristiques des triac FX Table 6.4: triac specification GER Kenndaten der Triac, FX Parametri dei triac, FX ESP Características de los triac, FX ∞ ➪ Internal Output protection None Protection interne de la sortie Aucune...

  • Seite 89: In-Rush Currents

    FX2N Series Programmable Controllers Outputs 6 6.2.1 In-rush currents In-rush currents 6.2.1 These currents should be kept as low as possible. The root mean square ( Ι ) < 0.2A. Reference Eqn 1 for ( Ι Ι Τ - In-rush current [A] - In-rush time [sec] Ι...

  • Seite 90: Triac Output Example

    FX2N Series Programmable Controllers Outputs 6 6.2.2 Triac output example Triac output example 6.2.2 Caractéristiques techniques des sorties triac 6.2.2 Beispiel einer Triac-Ausgangsbeschaltung 6.2.2 Dati tecnici delle uscite triac 6.2.2 Ejemplo de una conexión de salida Triac 6.2.2 ENG Typical wiring Exemple de câblage Figure 6.3: GER Verdrahtungsbeispiel...

  • Seite 91: Transistor Output Specification

    FX2N Series Programmable Controllers Outputs 6 Transistor output specification Transistor output specification Caractéristiques techniques des sorties des transistors Technische Daten der Transistor-Ausgänge Dati tecnici delle uscite a transistor Datos técnicos de las salidas transistorizadas ENG FX FRE Caractéristiques des transistor FX Table 6.6: transistor specification GER Kenndaten der Transistor FX...
  • Seite 92 FX2N Series Programmable Controllers Outputs 6 ENG FX FRE Caractéristiques des transistor FX Table 6.6: transistor specification GER Kenndaten der Transistor FX Parametri dei transistor FX ESP Características de los transistor FX ∞ ➪ Internal Output protection None Protection interne de la sortie Aucune...

  • Seite 93: Response Times

    FX2N Series Programmable Controllers Outputs 6 6.3.1 Response times Response times 6.3.1 OFF times increase as the load current decreases. For improved response times use a ‘dummy’ resistor, see Figure 6.4. If a response time of 0.5 msec or better is required when using ‘light loads’ use a ‘dummy’ resistor and ensure the signal line has a current greater than 60mA/24V DC.

  • Seite 94: Transistor Output Example

    FX2N Series Programmable Controllers Outputs 6 6.3.2 Transistor output example Transistor output example 6.3.2 Exemple d’un câblage de sortie de transistor 6.3.2 Beispiel einer Transistor-Ausgangsbeschaltung 6.3.2 Esempio del cablaggio di uscita di un transistor 6.3.2 Ejemplo de una conexión de salida transistorizada 6.3.2 Figure 6.5: -✩✩MT-ESS, FX...

  • Seite 95: Applying Safe Loads

    FX2N Series Programmable Controllers Outputs 6 Applying safe loads Applying safe loads Ensure all loads are applied to the same side of each PLC output, see previous figures. Loads which should NEVER simultaneously operate (e.g. direction control of a motor), because of a safety critical situation, should not rely on the PLC’s sequencing alone.
  • Seite 96 FX2N Series Programmable Controllers Outputs 6 MEMO 6-14...

  • Seite 97: Diagnostics

    FX2N Series Programmable Controllers Diagnostics 7 Diagnostics Diagnostics Diagnostic d’erreurs Fehlerdiagnose Diagnostica Diagnóstico de fallos y errores Preliminary checks Preliminary checks Vérifications à effectuer avant la mise en service Überprüfungen vor Betrieb Verificaciones preliminares Controlli prima del funzionamento ENG Check list FRE Points de contrôle Table 7.1: GER Prüfpunkte...

  • Seite 98: Basic Diagnostics

    FX2N Series Programmable Controllers Diagnostics 7 Basic diagnostics Basic diagnostics The following diagnostic functions will help identify, common faults. Diagnostic d’erreurs général Le diagnostic d’erreurs suivant vous offre une aide pour la recherche et l’élimination des perturbations. Allgemeine Fehlerdiagnose Die nachfolgende Fehlerdiagnose bietet Ihnen eine Hilfe zum Suchen und Beheben von Störungen. Diagnostica generale Le seguenti informazioni aiutano nella ricerca e l’eliminazione delle anomalie Diagnóstico general de fallos y errores...
  • Seite 99 FX2N Series Programmable Controllers Diagnostics 7 Resultados posibies de Possible Résultats Mögliche Possibili risultati la prueba results possibiles Prüfergebnisse dei controlli deverificación POWER POWER BATT.V BATT.V PROG-E PROG-E CPU-E CPU-E Power LED remains OFF Power LED comes ON Possible fuse blown in the PLC. Contact a Too many loads connected to the 24V DC service Mitsubishi service center for repair work.

  • Seite 100: Batt.v Led On

    FX2N Series Programmable Controllers Diagnostics 7 7.2.2 BATT.V LED ON POWER BATT.V PROG-E CPU-E BATT.V LED ON 7.2.2 LED BATT.V s’allume 7.2.2 BATT.V-LED leuchtet 7.2.2 Il LED BATT.V si accende 7.2.2 Diodo LED de BATT.V encendido 7.2.2 Fault Perturbation Störung Anomalla Fallo / avería Il LED BATT.V...
  • Seite 101 FX2N Series Programmable Controllers Diagnostics 7 Resultados posibies de Possible Résultats Mögliche Possibili risultati la prueba de results possibiles Prüfergebnisse dei controlli verificación ➭ ➭ ➭ ➭ M8005 Activar la indicación de Afficher les données de Daten von D8005 Visualizzare i dati di los datos de D8005.

  • Seite 102: Prog.e Led Flashes

    FX2N Series Programmable Controllers Diagnostics 7 7.2.3 PROG.E LED flashes POWER BATT.V PROG-E CPU-E PROG.E LED flashes7.2.3 LED PROG.E 7.2.3 PROG.E-LED blinkt 7.2.3 LED PROG.E 7.2.3 Diodo LED de PROG.E 7.2.3 Fault Perturbation Störung Anomalla Fallo / avería PROG.E LED PROG.E-LED Diodo LED de LED PROG.E...

  • Seite 103: Cpu.e Led On

    FX2N Series Programmable Controllers Diagnostics 7 7.2.4 CPU.E LED ON POWER BATT.V PROG-E CPU-E CPU.E LED ON 7.2.4 La LED CPU.E est allumée 7.2.4 CPU.E-LED leuchtet 7.2.4 Il LED CPU.E è acceso 7.2.4 Diodo LED de CPU.E encendido 7.2.4 Fault Perturbation Störung Anomalla...
  • Seite 104 FX2N Series Programmable Controllers Diagnostics 7 Remedy Remède Abhilfe Rimedio Remedio Desembornar la Disconnect Débrancher le Erdungsanschluß Staccare il conexión de puesta a earth/ground terminal raccordement de terre. abklemmen. collegamento a terra. tierra. ➭ ➭ ➭ ➭ ➭ ➭ ➭ ➭...
  • Seite 105 FX2N Series Programmable Controllers Diagnostics 7 Remedy Remède Abhilfe Rimedio Remedio Probablemente se trata Erreur éventuelle de Möglicherweise Probabile errore di tempo de un fallo de tiempo de Possible program/scan temps de cycle de Programmzykluszeit- ciclo nel programma. ciclo de programa. time error.

  • Seite 106: Common Errors

    FX2N Series Programmable Controllers Diagnostics 7 Common errors Common errors Corroded contact points at some point in an I/O line. An I/O device has been used outside its specified operating range. An input signal occurs in a shorter time period than that taken by one program scan. 24V DC power supply is overloaded.

  • Seite 107: Replacing The Battery

    FX2N Series Programmable Controllers Diagnostics 7 Replacing the battery Replacing the battery Turn OFF PLC’s power supply. Remove top cover (Z) from the PLC. Remove battery from holder - disconnect and replace. (This should be carried out in 20s if the current data held in the PLC’s RAM is not to be lost). Refit battery and cover.

  • Seite 108: Maintenance

    FX2N Series Programmable Controllers Diagnostics 7 Maintenance Maintenance Battery has a 5 year life (3 years when used with FX-RAM-8). Check interior temperature of the panel. Check panel air filters if fitted. Check for loosening of terminals or mounting facilities (due to vibration). Entretien Durée de vie de la batterie: 5 ans (3 ans en cas d’utilisation de la FX-RAM-8).

  • Seite 109: Error Flags On Indicates Error

    FX2N Series Programmable Controllers Diagnostics 7 Error flags ON indicates error. Error flags ON indicates error. Indicateurs d’erreurs “MARCHE” désigne une erreur. Fehlermerker EIN bezeichnet einen Fehler. Merker di errore ON indica un errore. Marcadores de fallos/errores “CONEXION” designa un fallo o error. ENG FRE Table 7.2:...
  • Seite 110 FX2N Series Programmable Controllers Diagnostics 7 ENG FRE Table 7.3: (M8060 - M8069) (M8060 - M8069) Error flags Indicateurs d’erreurs GER (M8060 - M8069) (M8060 - M8069) Fehlermerker Merker di errore ESP Marcadores de fallos/errores (M8060 - M8069) REF.

  • Seite 111: Error Registers

    FX2N Series Programmable Controllers Diagnostics 7 Error registers Error registers Registre d’erreurs Fehlerregister Registri di errore Registro de fallos/errores ENG Error registers (D8000 - D8009) FRE Registre d’erreurs (D8000 - D8009) Table 7.4: GER Fehlerregister (D8000 - D8009) Registri di errore (D8000 - D8009) ESP Registro de fallos/errores (D8000 - D8009) REF.
  • Seite 112 FX2N Series Programmable Controllers Diagnostics 7 ENG Error registers (D8060 - D8069) FRE Registre d’erreurs (D8060 - D8069) Table 7.5: GER Fehlerregister (D8060 - D8069) Registri di errore (D8060 - D8069) ESP Registro de fallos/errores (D8060 - D8069) REF.

  • Seite 113: Error Codes

    FX2N Series Programmable Controllers Diagnostics 7 Error codes Error codes Codes d’erreurs Fehlercodes Codici di errore Códigos de fallo/error ENG FRE Table 7.7: (D8061 - D8062) (D8061 - D8062) Error codes Codes d’erreurs GER (D8061 - D8062) (D8061 - D8062) Fehlercodes Codici di errore...

  • Seite 114: Instruction List

    FX2N Series Programmable Controllers Diagnostics 7 Instruction list Instruction list Vue d’ensemble des instructions relatives aux applications Übersicht der Applikatiosanweisungen Elenco delle istruzioni applicative Vista de conjunto de las instruciones de aplicación ENG Numerically sorted FRE Classement numérique Table 7.8: GER Numerisch sortiert In ordine numerico...
  • Seite 115 FX2N Series Programmable Controllers Diagnostics 7 ENG Alphabetically sorted FRE Classement alphabétique Table 7.9: GER Alphabetisch sortiert In ordine alfabetico ESP Clasificación alfabética Symbol FNC No. Symbol FNC No. Symbol FNC No. GBIN SEGD ABSD SEGL Hour SFRD...
  • Seite 116 FX2N Series Programmable Controllers Diagnostics 7 8000 steps, FX-RAM-8 = 8K - 16K steps X000 Y010 FX-EPROM-8 = 8K -16K steps T020 K010 FX-EEPROM-16 = 4K - 16K steps X0 - 327 (256 pnts) (X+Y) ≤ 256 pnts Max. Y0 - 327 (256 pnts) M0 - M499 (500 pnts) M500 - M1023 (524 pnts) by Parameters...

  • Seite 117: Appendix A: Associated Manuals

    FX2N Series Programmable Controllers Appendix A: Appendix A: Associated Manuals Associated Manuals Appendix A: Ulteriori manuali Appendix A: Further information on programming, programming Per ulteriori informazioni sulla programmazione , tools operation, optional modules or special function sugli strumenti di programmazione o sui moduli units/blocks can be found in each respective manual.
  • Seite 118 FX2N Series Programmable Controllers Appendix A: Table A-1: Associated Manuals Autres manuels Weitere Handbücher Ulteriori manuali Otros manuales Manual name Manual No. Description -4DA This manual contains explanations for wiring, installation, specification Special Function Block JY992D65901 and BFM allocation, etc. User’s Guide -4AD Ces manuels renferment entre autres, des indications pour l'installation...
  • Seite 119 FX2N Series Programmable Controllers Appendix A: Table A-1: Associated Manuals Autres manuels Weitere Handbücher Ulteriori manuali Otros manuales Manual name Manual No. Description This manual contains explanations for N:N network, parallel link, computer link and no protocol communication (RS instruction and FX 232IF RS232C interface block) about FX family PLC.
  • Seite 120 FX2N Series Programmable Controllers Appendix A: MEMO...
  • Seite 121 FX2N Series Programmable Controllers Appendix B: Index AC powered base units General features ..........Approvals FX2N units .

  • Seite 122: Appendix B: Index

    Appendix B: Index FX2N Series Programmable Controllers Power supply Wiring ........... . Cable size Advice .
  • Seite 123 FX2N Series Programmable Controllers Appendix B: Index Accessoires des appareil ....1-9 Designation des types Alimentation en tension Explication ......1-10 Caracteristiques des câbles .
  • Seite 124 Appendix B: Index FX2N Series Programmable Controllers Modules d’extension ..... . 1-2 Temps de réponse avec un transistor ..6-11 Occupation des bornes, tous types .
  • Seite 125 FX2N Series Programmable Controllers Appendix B: Index ......AC-Grundgerät Fehlercodes 7-17 ......
  • Seite 126 Appendix B: Index FX2N Series Programmable Controllers Montage, allgemeine Hinweise Verdrahtung ....DIN-Schienen-Montage 3-11 Anschluß der Spannungsversorgung 4-11 ....
  • Seite 127 FX2N Series Programmable Controllers Appendix B: Index Accessori....... 1-9 Caratteristiche generali Alimentazione della tensione Apparecchi FX2N .
  • Seite 128 Appendix B: Index FX2N Series Programmable Controllers Manutenzione Cambio della batteria ....7-11 Manutenzione generale ....7-12 Merker di errore.
  • Seite 129 FX2N Series Programmable Controllers Appendix B: Index Accesorios de las unidades ....1-9 Entradas, Datos técnicos Alimentación de tensión Cableado de las entradas 110V CA ..5-9 Aislamiento del sistema .
  • Seite 130 Appendix B: Index FX2N Series Programmable Controllers Ocupaciones de bornas Unidad base Bornas de conexión FX ....2-1 Datos técnicos de las Modulos de ampliacion FX0N entradas 110 V CA .

  • Seite 131: Index

    FX2N Series Programmable Controllers Introduction Introduction Einleitung Introduzione Introducción Terminal Occupation Klemmen- Assegnazione Ocupaciones Layouts des bornes belegungen dei morsetti de bornas Installation Installation Installation Installazione Instalación Notes Alimentation Spannungs- Alimentazione Alimentación Power supply en tension versorgung della tensione de tensión Inputs Entrées Eingänge...
  • Seite 132 Introduction Introduction Einleitung Introduzione Introducción Terminal Occupation Klemmen- Assegnazione Ocupaciones Layouts des bornes belegungen dei morsetti de bornas Installation Installation Installation Installazione Instalación Notes Alimentation Spannungs- Alimentazione Alimentación Power supply en tension versorgung della tensione de tensión Inputs Entrées Eingänge Ingressi Entradas Outputs...
  • Seite 133 All examples and diagrams shown in this manual are intended as an aid to understanding the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the product based on these illustrative examples. Owing to the very great variety of possible applications, users must satisfy themselves as to the suitability of each specific application.
  • Seite 134 HEADQUARTERS EUROPEAN REPRESENTATIVES EUROPEAN REPRESENTATIVES EURASIAN REPRESENTATIVES MITSUBISHI ELECTRIC EUROPE GEVA AUSTRIA UAB UTU POWEL LITHUANIA Avtomatika Sever Ltd. RUSSIA EUROPE B.V. Wiener Straße 89 Savanoriu pr. 187 Lva Tolstogo St. 7, Off. 311 German Branch AT-2500 Baden LT-2053 Vilnius RU-197376 St Petersburg Gothaer Straße 8...

Diese Anleitung auch für:

Melsec fx2n serie

Inhaltsverzeichnis