Alarms And Troubleshooting - smith&nephew RENASYS GO Bedienungsanleitung

6. Alarms and troubleshooting

A description of the device alarms and indicators is provided below.
Use this section as a reference in the case your device alarms.
If the alarm does not stop, contact your healthcare provider to inform them
of the alarm condition.
Power
Turns the device on and off.
Battery status indicator
Shows the status of battery
life.
Up selector
Allows the pressure setting
to be increased and scroll
through menu options.
Down selector
Allows the pressure setting
to be decreased and scroll
through menu options.
Keypad lock
Locks the keypad to restrict
accidental adjustment of
therapy. When activated the
light will illuminate.
Audio pause
Silences the alarm for
approximately 2-3 minutes.
When activated the light will
illuminate.
If a new alarm occurs, the
Audio Pause will cancel.
Start/pause therapy
Not available when locked
for homecare use.
Allows therapy to be started
or paused by clinician while
device is unlocked.
23
EN