Campingaz Oxypower CV220 Bedienungsanleitung Seite 64

®
OXYPOWER
MAINTENANCE
AVOID ALL CONTACT BETWEEN THE OXYGEN AND FATS.
KEEP THE EQUIPMENT SPOTLESSLY CLEAN.
CLEAN IT WITH CLEAN, DRY RAGS, NEVER GREASY ONES.
Oxygen regulator
Check the connection and seal every time you change the tank.
Gas valve
Check the seal every time you change the cartridge.
Welding torch
The tip orifice must be free of dirt or obstruction.
If the tip is partially obstructed, clear it by rubbing the end of the lighted tip on a
bit of softwood (this makes it pop without danger).
Hoses
Check the hoses periodically.
Change the hoses immediately if you notice any defects such as cuts, cracks or
burns.
In the event of an anomaly and for all replacement parts, contact your
Campingaz® retailer for details of your nearest After-Sales Centre.
66