Graef MS 61 Bedienungsanleitung Seite 25

Milk frother MS 61 / MS 62 / MS 80 / MS 85
causes of faults and how to repair
The following table helps repair and localise small faults:
Fault
The indicator lamp
does not illuminate
after switching on.
Milk leaks from the
cap.
important!
If you cannot solve the problem with the above steps, please contact
►
our customer service department.
Possible cause
The plug is
not plugged in.
Temperature monitoring
triggered.
Filling level too high.
The seal ring is missing
or soiled.
The cap is not correctly
set on.
© Gebr. Graef GmbH & Co. KG - 02
Repair
Plug in the plug.
Let the unit cool off.
Reduce the filling
level.
Clean the seal ring
and put it back in.
Put the cap on in
such a manner that
it audibly latches.
EN
25