Serato RANE SEVENTY Benutzerhandbuch Seite 12

To edit a deck's FX beat division, push the FX Joystick up or down while the deck is in focus on the
Display. Use this setting to adjust the rhythmic timing of a deck's effect(s) in accord with the FX tempo.
By default, the available beat division settings for the Flex FX range from 1/32T (32nd note triplet) – 32D (32
bars dotted), while the beat division settings for Serato DJ Pro effects range from 1/16 (16th note) – 8 (8
bars). If you would like to modify the available beat division settings for the Flex FX, you can go to the Main
Menu and switch from the default Extended Mode to No Dotted, No Triplet, or Simple Mode. See the
Main Menu section of this manual for more help navigating the settings.
Note: The Brake effect does not have a beat division parameter. In place of a beat division parameter, the
Reverb effect has a Decay parameter, which adjusts the intensity and duration of the reverb.
To increase or decrease a deck's FX depth level, turn the Depth Knob for the deck. As you increase or
decrease the depth level, the Depth Level Meter will update on the Display.
Note: In place of a Depth Level Meter, the Brake effect has a Length Meter, which adjusts the amount of
time it will take for a track to stop or "brake" when the effect is activated.
To edit a secondary Flex effect parameter while
in Flex FX Mode:
1. Hold Shift and press the FX button for the effect.
This will take you to the secondary parameter
Display screen.
2. Highlight the parameter you want to adjust with the
FX Joystick. Then turn the Parameter Knob to
adjust the parameter.
3. Push the Parameter Knob to confirm your changes
to the parameter. The new setting will be saved and
remembered when you power off Seventy.
4. Press an FX button or push the Joystick to the left
in order to return to the main Flex FX Display
screen.
Note: The Brake and Delay Flex FX do not have secondary parameters.
The following secondary Flex effect parameters are available for editing:
•
Echo:
Type: Simple, Duck, or Hold. Use the Simple setting for a standard echo effect. If Duck Echo is
o
selected, the echo effect will be heard only when the deck is muted with the Channel Fader or
Crossfader. Use the Hold setting for a standard echo effect with extra feedback; if Hold Echo is
selected and the Feedback parameter is set to 100%, the echoes will infinitely recirculate.
HPF: Sets the cutoff frequency for the echo effect. Any frequencies below the assigned cutoff will
o
be bypassed by the effect.
Feedback: Sets the level and decay time of the echo.
o
•
Reverb:
Room: Small or Large. The Small setting will simulate the reverb effect of a small room, making
o
for tighter reverberation sounds. The Large setting will simulate the reverb effect of a larger room,
making for longer reverberations.
HPF (High Pass Filter): Sets the cutoff frequency for the reverb effect. Any frequencies below the
o
assigned cutoff will be bypassed by the effect.
•
Flanger:
Feedback: Adjusts the intensity and resonance of the flanger.
o
Polarity: Select between POS (positive) and NEG (negative) to adjust the overall harmonics of the
o
flanger.
•
Phaser:
Feedback: Adjusts the intensity and resonance of the phaser.
o
You can also change default Flex FX parameters from Seventy's Main Menu. To learn more, see the
Menu section of this manual.
12
Secondary Parameter Display
(for the Reverb Flex Effect)
REVERB
ROOM
HPF
Adjustable Parameters
LARGE
60 0 Hz
.
Current Settings
Main