Serato RANE SEVENTY Benutzerhandbuch Seite 11

Applying Effects to a Deck
To activate software or internal effects on a deck, use the deck's Effects Toggle. Latch the toggle in the
up position to apply effects to a deck. Alternatively, you can pull the toggle down and then let go in order to
momentarily apply effects to the deck.
To deactivate software or internal effects on a deck, place the deck's Effects Toggle in the center position.
To select or deselect which effects will be activated by the Effects Toggles, press the FX buttons.
When an effect is selected, the corresponding FX button will be brightly lit, and the effect name will appear
on the Display.
To change whether the FX buttons select software or internal effects, press the FX Mode button.
When set to Flex FX Mode, the FX Mode button will be lit blue. When set to Software Effects Mode, the
button will be lit amber.
If set to Flex FX Mode, you can activate one effect, which will be applied to both decks.
If set to Software Effects Mode, you can stack up to three different effects on each deck.
Note: If you would like to use multiple software effects on a deck, set Software FX > Multi FX to On in the
Main Menu, which you can access by holding Shift and pressing Tap (see the
manual for more help navigating the settings). Also, make sure that Serato DJ Pro is set to Multi FX mode by
going to the FX tab and selecting the deck's  icon.
In Software Effects Mode, the FX buttons to the left of the FX Mode button will correspond to Bank A
software effects (routed by default to Deck 1), and the three FX buttons to the right of the FX Mode button
will correspond to Bank B software effects (routed by default to Deck 2). Names of Serato DJ Pro effects
will be visible on Seventy's Display (as pictured on the previous page).
To change which Serato DJ Pro effect is applied to a deck in Software Effects Mode:
1. Hold Shift and then press the FX button corresponding to the effect. The FX button will flash.
2. Turn the Parameter Knob to scroll through effects. As you scroll, the effect name will update on the
Display.
3. When the effect you'd like to apply is displayed, press the Parameter Knob. The FX button will stop
flashing.
To use software effects and a Flex effect simultaneously, set Software FX > Mix Flex FX to On in the
Main Menu, which you can access by holding Shift and pressing Tap (see the
manual for more help navigating the settings). While this setting is On, the currently activated effect(s) will
remain active even as you change the FX mode. If the setting is Off, switching the FX mode will deselect
any effect(s) from the previous mode.
To change how software effects sound when they're deselected, set Software FX > USB Insert to On
or Auto in the Main Menu, which you can access by holding Shift and pressing Tap (see the
section of this manual for more help navigating the settings). When set to Auto, any active software effect
will be muted as soon you deselect it with the FX button. When set to On, deselected software effects will
have an audible "tail" as they gradually decay.
Note: The Auto setting may be preferable for Scratch DJ's, as it decreases the amount of overall audio
latency, better allowing you to scratch with precision.
Editing Live Effects on a Deck
The Display screen will show the FX tempo for each deck, which will automatically match the tempo of the
song playing on the deck (unless you manually change this setting as described below). With most effects,
the Display will also show the FX beat division and depth level for each deck. See the previous page for an
illustration of the Display.
To change which deck is in focus on the Display, push the FX Joystick left and right. The Focus Arrow
surrounding the FX tempo will show which deck is currently in focus.
To edit a deck's FX tempo, turn the Parameter Knob or press the Tap button two or more times at the
desired BPM while the deck is in focus on the Display. The new FX tempo will be shown on the Display.
Note: After you manually edit a deck's FX tempo, the setting will not reset even after loading a new song to
the deck. To make a deck's FX Tempo go back to automatically matching the tempo of the track loaded on
the deck, press and hold the Tap button for three seconds while the deck is in focus on the Display.
Main Menu section of this
Main Menu section of this
Main Menu
11