Starting the
memory function
1.
Press the M1 button.
When the time has elapsed
Pausing
Changes
62
You may call up the settings you have stored in the
memory at any time.
2.
Press the Start button.
The memorised operation runs.
A signal sounds when the time has elapsed. The
appliance switches off.
0 appears in the display.
Open the oven door or press the Stop button.
Press the Stop button once or open the oven door.
Press the Start button after closing the door.
The memory settings cannot be changed. If you wish
to store a different setting, assign new settings to
memory locations M1 and M2.