FLIR T10 Serie Handbuch Seite 17

3 EN-US English
3.10 View from the bottom
See Figure 2.3 View from the bottom, page 3.
1. Memory card.
Note Empty or use a memory card that has not previously been used in an-
other version or type of camera. The cameras may organize files differently
on the memory card. There is therefore a risk of losing data if the same mem-
ory card is used in different versions or types of cameras.
2. LED indicator showing that the memory card is busy.
Note
• Do not eject the memory card when this LED is flashing.
• Do not connect the camera to a computer when this LED is flashing.
3. USB Micro B cable (to connect the camera to a computer).
4. HDMI cable (for digital video output).
5. Battery condition LED indicator.
6. Power supply cable (to power the camera and charge the battery).
7. High-speed interface cable.
8. Tripod mount.
9. Button to release the lens.
10. Latch to release the battery.
3.11 View from the rear
See Figure 2.4 View from the rear, page 4.
1. Sensor that adjusts the touch-screen LCD intensity automatically.
2. Button to switch between touch-screen LCD mode and viewfinder mode.
3. Viewfinder. 5
4. Programmable button
5. Joystick with push-button functionality.
6. Back button.
7. Camera lamp button.
8. Button to switch between automatic and manual image adjustment mode.
9. Image archive button.
5. This item is dependent on the camera model.
#T810138; r. AB/47238/47238; mul
.
5
9