FLIR T10 Serie Handbuch Seite 15

3 EN-US English
3.5 Download FLIR Tools
FLIR Tools lets you quickly create professional inspection reports that clearly
show decision makers what you've found with your camera.
Import, analyze, and fine-tune images easily. Then incorporate them into concise
documents to share findings and justify repairs.
Go to the following website to download FLIR Tools:
http://support.flir.com/tools
3.6 Check out our FLIR apps
Use our apps to analyze your IR images, create reports, and share your reports
using Dropbox, Box.net, FTP, e-mail, etc.
Use your mobile device to go to the following website and download the apps:
http://onelink.to/tools
3.7 Quick start guide
Follow this procedure:
1. Put a battery into the battery compartment.
2. Charge the battery for 4 hours before starting the camera for the first time.
3. Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other version or type of camera. The cameras may organize files differently
on the memory card. There is therefore a risk of losing data if the same mem-
ory card is used in different versions or types of cameras.
4. Push the On/off button
5. Aim the camera toward the object of interest.
6. Adjust the infrared camera focus.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
7. Push the Save button fully down to save an image.
#T810138; r. AB/47238/47238; mul
to turn on the camera.
7