Inhaltsverzeichnis
Werbung
Configuring the Mouse Device
–--------------------------
First specify a mouse protocol type. Choose one from the following list:
1.
Microsoft compatible (2-button protocol)
2.
Mouse Systems (3-button protocol)
3.
Bus Mouse
4.
PS/2 Mouse
5.
Logitech Mouse (old type, Logitech protocol)
6.
Logitech MouseMan (Microsoft compatible)
7.
MM Series
8.
MM HitTablet
9.
Unknown
10.
No Mouse
Enter a protocol number [6]: 4
If your mouse has only two buttons, it is recommended that you enable Emula-
te3Buttons.
Do you want to enable Emulate3Buttons (yes/no)? [no]: no
X11 Big Mouse Cursor
Insbesondere für große Bildwände kann es vorteilhaft sein, den Mauszeiger zu vergrößern. Geben
Sie den gewünschten Vergrößerungsfaktor an.
Configuring the Big Mouse Cursor
--------------------------------
When using the X Server with high resolution
the standard cursors are hard to track for some people.
Therefore you can define magnified mouse cursors.
Following magnification factors are available:
factor 1
factor 2..8
Enter the magnification factor [1]: 2
These are your Input Device settings
====================================
- Cursor size:
- Mouse Protocol:
Emulate3Buttons:
ChordMiddle:
Everything correct? (yes/no)? [yes]: y
Settings for the Output Devices
===============================
Please enter the required settings for
- Graphic Accelerator Type (OVT-2682, OVT-2882, AGX-3000 or AGX-3281)
- Output Signal (analog or digital)
- Monitor Resolution (only for analog devices)
- Refresh Rate
- Screen Type (Multi Head or Multi Screen; only monolithic Server)
- Screen Arrangement (only monolithic Server)
DOC-3265-0
A
X Terminal
RGUS
:
standard cursors
:
magnified cursors
Factor 2
"PS/2 Mouse"
disabled
disabled
December-2003
3-46
Werbung
Inhaltsverzeichnis
