Molpir COMPACT 1.6 Diagnose Bei Ausfällen Seite 13

COMPACT 1.6
EN
Solution
• Replace fuse checking and correcting breakdown cause.
• Check connections or possible breakdowns, correct or replace.
• Invert the position of the electrical control and control panel connection cable.
• Charge or replace battery.
• Reprogram controls.
• Replace remote control battery and reprogram.
• Replace electronic control.
• Replace controls.
• Correctly connect terminals of control module.
• Replace module.
• Replace compressor.
• Charge or replace battery.
• Check the wire or terminal contacts and correct.
• Replace the return air sensor.
• Check the wire or terminal contacts and correct.
• Replace the anti-freeze sensor.
• Check the causes of the block and fix or replace the condenser fan.
• Check the condenser fan + and - outputs in the electronic control and replace the control if
there are no outputs.
• Connect the terminals in the condenser fan.
• Check the current output in electronic control, replacing whenever there is no + and - output.
• Replace the centrifugal blower or connect the terminals.
13