Charging The Batteries - Pettec Antibark Spray 2.0 Bedienungsanleitung

Charging the batteries

Fully charge the Antibark Spray 2.0 battery before using it for the first time.
•
Do not charge the battery near combustible substances.
•
The battery of the Antibark Spray 2.0 must be fully charged if the last use has been
•
over three months ago.
The battery requires charging if:
the indicator light on the Antibark Spray 2.0 flashes red.
•
the indicator light continually blinks green when you switch on the Antibark Spray 2.0
•
Important note
The Antibark Spray 2.0 is only partially charged when it is shipped. The first full battery
charge takes up to 3 hours.
22