Operation; Intended Use; Initial Use - Beko CHP5550W Bedienungsanleitung

Operation

3

3.1 Intended use

This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping small
amounts of solid food only.

3.2 Initial use

Clean the appliance parts before
initial use (see 4.1).
3.3 Operation
1. Place your appliance on a hard
and flat surface on its non-slip
rubber base (5).
2. Remove the
Operating unit (1) and the mid-
dle cover (2) from the plastic
container.
3. Place the blending shaft (4) on
the fixed shaft holding the plas-
tic section.
4. Put the ingredients you want to
prepare into the plastic contain-
er (3) (see. 3.4).
Chopper / User Manual
Motor body/
5. After placing the middle cover
(2) onto the plastic container (3)
in a way that the rubber gasket
is facing down, place the Motor
body/Operating unit (1) on top.
WARNING: Make
sure that the middle
cover (2) is fully
seated onto the plas-
A
tic
Otherwise, the Motor
Body/Operating Unit
(1) will not be seated
securely and the ap-
pliance will not start.
6. Plug in the appliance.
7. Press the operating unit accord-
ing to the processing duration
(see 3.4).
Each press on the
operating unit that
lasts 1 to 2 seconds
C
is a "PULSE". "PULSE"
is a function. Thanks
to this function, you
get better blending
results.
container (2).
9 / 119 EN