Hitachi RAS-70YH7 Bedienungsanleitung Seite 11

FAN OPERATION
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit at the
end of summer.
FAN SPEED (AUTO)
For the heating operation
For the cooling operation
Press the FUNCTION selector so that the display indicates
1
(FAN).
2
Press the
(HI)
(MED)
(LOW)
(SILENT) : Fan speed ultra slower.
START
Press the
beep. Press the button again to stop operation.
STOP
..... When the AUTO fan speed mode is set in the cooling/heating operation:
When the difference of room temperature and setting temperature is large,
●
fan starts to run at HI speed.
After room temperature reaches the preset temperature, the heating
●
operation, which changes the fan speed and room temperature to obtain
optimum conditions for natural healthful heating will be performed.
● When the difference of room temperature and setting temperature is large,
fan starts to run at HI speed.
After room temperature reaches the preset temperature, the cooling
●
operation, which changes the fan speed and room temperature to obtain
optimum conditions for natural healthful cooling will be performed.
– 9 –
(FAN SPEED) button.
: The strongest air blow.
: Fan speed slow.
: Fan speed slower.
(START/STOP) button. Fan operation starts with a