Self-Diagnosis - Klarstein Kraftwerk Smart 10 Handbuch

5. When the machine is in Sleep function, the Fan Speed would turn to be LOW
speed.
Dehumidify (DRY) mode
In dehumidify (DRY) mode, the temperature cannot be adjusted, the ventilation will fix
at low speed. When the unit is operating in Dehumidify ( DRY) mode, humidity extracted
from the air is collected in an internal tank. If the tank reaches full, the compressor
and motor cut out automatically. At the same time, the "Water Full" indicator comes
on. An alarm will also sound. When the tank is full, drain the water as shown in the
page concerning "DRAINAGE". You may also use the unit without having to empty
the tank so often by using "continuous drainage", please also refer to the page about
"DRAINAGE".

Self-diagnosis

This machine is equipped with self-diagnosis function. If something is wrong in the
machine, the display window will show the sign: E1, E2, E3 or E5 , which reflects
different condition. At this time, please call your service centre.
Notes
• To prolong the compressor's life, after switch-off of the unit, please wait for
3 minutes (at least) before re-switch.
• The cooling system will switch off if the ambient temperature is lower than the
set one. The ventilation, however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
EN
33