Turning On/Off - Klarstein Kraftwerk Smart 10 Handbuch

EN
32

Turning ON/OFF

1. Press ON/OFF soft touch button, the unit will start automatically. If the ambient
temperature is higher or equal to 24 °C, the unit will work in cooling mode. If it is
below 24 °C, the unit will work in ventilation mode (low fan).
2. Indicators of the functions in progress come on at the same time.
The display window shows the ambient room temperature from 0 °C to 50 °C.
3. To turn the unit off, press ON/OFF button again.
Setting mode/function
Press MODE button to select required working mode: automatic, cooling, fan or
dehumidify (dry). The indicator of your selected mode lights on.
Setting temperature
1. Press 'Temperature up' or 'Temperature down' button to regulate the temperature
you desired.
2. The display window will show the temperature you set as you press 'Temperature
up' or 'Temperature down' button. Otherwise, it will always show the ambient
temperature.
3. The pre-setting temperature of this machine is: 24 °C for cooling.
Setting ventilation speed
1. Press SPEED button to choose the ventilation speed you need, high, medium or
low. The indicator of high, medium or low ventilation will light on at the same time.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically
according to the ambient temperature (the related indicators will light on), at this
time, the SPEED and TEMPERATURE UP & DOWN buttons are invalid.
Setting timer
1. Press TIMER button to set the operating hours you desired (1 to 24 hours, the timer
indicator will light on). When the set time has been reached, the machine will turn
off automatically. The display window will show the hour(s) you set as you press
TIMER button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRE-SET
the time for the machine to work. For example, if you press the timer to '2' , the unit
will work automatically after 2 hours.
Sleep function
1. In cooling mode, by pressing the SLEEP button, the set temperature will increase
1 °C at the 1st hour, another 1 °C at the second hour, then keeps at that
temperature.
2. In sleep mode, the ventilation will keep at low speed. Re-press the SLEEP button,
the setting temperature and ventilation speed will return to the pre-selected one.
3. The unit will shut down automatically after the SLEEP function running for 12 hours.
4. Please note, the sleep function is not available while the machine is working in
AUTO, FAN (ventilation) or DEHUMIDIFICATION mode.