Pelgrim OVP436 Bedienungsanleitung Seite 79

OPERATION
Select a timer function
3. Touch the timer key several times to select a timer function if preferred.
If you do not want to use a timer function, you can start the manual operation of the oven
immediately.
Start the operation of the oven
4. Put the dish in the oven.
5. Touch and hold the start key to start the operation of the oven.
For most dishes you should first preheat the oven.
▷
When the oven gets the correct temperature, the temperature symbol will disappear and
▷
you will hear an audible signal.
▷ Wait for the temperature symbol in the display to disappear before putting the dish in
the oven.
If no timer function is activated, the display shows the temperature symbol, the operation
symbol and the cooking duration time (counting up).
If a cooking time has been set, the display shows the temperature symbol, the operation
symbol and the cooking time (counting down).
If a cooking time and end time has been set, the display shows the end time symbol and
the end time that has been programmed. When the oven starts automatically, the display
shows the temperature symbol, the operation symbol and the cooking time (counting
down).
Stop the operation of the oven
6. Touch and hold the stop key to stop the operation of the oven manually.
When a cooking time has been set, the oven will stop the operation automatically. The
operation symbol is blinking and '00:00' is shown in the display. You will hear an audible
signal. Touch any key; the audible signal will stop and the current time is shown in the
display.
7. Turn the function knob and temperature knob to 'Off' position after each use.
EN 13