Troubleshooting; Problems And Solutions - Sarstedt Automatic-Sarpette Bedienungsanleitung

8. Troubleshooting

8.1. Problems and solutions

Suction capacity is low or
no aspiration
Pipette is dropping
Reduced service life
with fully charged battery
Extremely long battery
charging time
Batteries not charging
Battery mode not possible
Instruction Manual - Automatic-Sarpette
Low pipetting speed set
Pipette holder is damaged
Nose cone is not tightly screwed
Batteries are discharged
Battery is defective
Battery is inserted incorrectly
Pipette is not correctly positioned in
the silicone pipette holder
Pipette is damaged
Pipette holder is damaged
Wrong battery type
Batteries are spent
Wrong power unit
used
Batteries inserted
incorrectly
Wrong battery type
Wrong power unit used
Batteries inserted
incorrectly
Wrong battery type
Batteries missing
®
Increase pipetting speed
Replace pipette holder
Tighten the nose cone
Load pipette aid or connect
to power supply
Replace batteries
Insert batteries correctly
Reinsert pipette and push into
the pipette holder until it locks
into position
Insert new pipette
Replace pipette holder
Use only original batteries
Replace batteries
Only use the original
power unit
Insert batteries correctly
Use only original batteries
Only use the original power unit
Insert batteries correctly
Use only original batteries
Insert batteries
13