Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Firmware compatibility
Features of the DCP interface
DCP (Drive Control Position) is a protocol used for the serial con-
nection, via RS485 interface, between a Lift Controller and a Drive
Controller.
The SBI DCP 33 card supports the DCP3 protocol for Lift Controller
without absolute encoder (not all functions):
● control via DCP serial connection rather than digital I/O
● Status messages, useful for diagnostics, are also transmitted
via DCP
● possibility of accessing all menus and parameters from the
"host DCP" keypad and display (see 7 - DCP master keys and
drive functions/keys conversion table).
The card is compatible with AVyL drives with firmware 3.6 or later.
Lift
Controller
Monitoring
system
● Point-to-point connection
● Drive Controller and Lift Controller connected via RS485 inter-
face (semi-duplex mode)
● Baud rate:
● Data bits:
● Parity:
Instruction manual
RS485
Drive
(DCP)
Controller
Connection via DCP
38,400
8
none
SBI-DCP-33
DCP Interface card for
AVyL drive
Incremental
encoder
M
Hoist Motor
ENGLISH-
Werbung
