Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7 - DCP master keys and drive functions/keys conversion table
Control
Master FSP
Keys
Not available
→
2 X
Jog
Non
disponibile
Help
↓
0x08
Alarm
↑
0x10
Escape
←
0x04
Home
E
Enter
0x20
→
Shift
0x40
4 - ENGLISH
Text reference
[START]
[STOP]
[Increase] / [Jog]
[Decrease] / [Rotation control]
[Down arrow] / [Help]
[Up arrow] / [Alarm]
[Left arrow] / [Escape]
[Enter] / [Home]
[Shift]
START key commands the drive to Enable and Start.(Command
select = I O key)
STOP key commands to Stop and disable
(Command select = I O key)
Stop key also resets the sequencer after an alarm event
Motor pot and Jog functions are not available on AVy L version.
Used to scroll down menu items in menu navigation, picklists in
selectors, or digit values in numeric editing.
After pressing shift key, an item-specific information menu is en-
tered when applicable. Help menu can be browsed with up/down
arrows. Left arrow returns to normal mode.
Used to scroll up menu items in menu navigation, picklists in
selectors, or digit values in numeric editing.
After pressing Shift key, the Alarm list display mode is entered.
Active alarms and Alarms pending for acknowledge can be
browsed with up/downs arrows.
Alarms can be acknowledged whit the Enter key. Left arrow
returns to normal mode.
Used to go up one level in menu navigation; to scroll digits in
numeric edit mode, to return to normal mode from alarm list or
help modes.
After pressing shift key, it is used to Escape out of numeric edit or
selection with no change.
Used to go down one level in menu navigation; to enter Selec-
tions or numeric values after editing, to issue commands, to
acknowledge alarms in the Alarm list mode.
Home second function, return to Monitor menu from any main
menu level.
Shift button enables the keypad second functions
(Rotation control, Jog, Help, Alarm, Escape, Home)
Function
Werbung
