Loading Film - Rollei Prego 90 AF Gebrauchsanleitung

Loading film

1. Press the back-lock release as shown to open the
camera back. (Fig. 3)
2. Cautiously place the film cassette in the film chamber,
taking care not to use force.
3. Pull the film leader over to the starting mark on the
opposite side. If necessary, rewind excessive length of
film manually, turning the cassette spindle. Make sure
that the film lies flat. (Fig. 4)
4. Close the camera back so that it clicks into place. The
camera automatically advances the film to the first
exposure.
5. The frame counter now reads "1EX".
46
Display signaling film-loading error
Notes
• The camera detects film-loading errors. In this case,
"E" will blink in the LCD, and the shutter will remain
locked. Open the camera back and repeat the loading
operation.
• Do not load the film in direct sunlight. Turn your back
on the sun to shade the camera during loading.
Film-speed setting
With DX-coded film rated between ISO 50/18° and 3200/
36°, the camera sets the film speed automatically. With
non-DX-coded film, it will default to ISO 100/21°.