Inserting The Batteries; Checking Battery Condition - Rollei Prego 90 AF Gebrauchsanleitung

Inserting the batteries

1. Open the battery-chamber cover by pressing its hole
with a pointed object as shown in Fig. 1.
2. Insert two fresh batteries (type CR-123A or DL-123A)
with their positive and negative poles oriented as
illustrated. Correct polarity is indispensable for
operation of the camera! (Fig. 2)
3. Press the battery-chamber cover shut until it clicks into
place.
Notes
• The batteries need not be removed when the camera
is not in use. The camera will automatically shut down
three minutes after use.
• Changing the batteries in mid-roll will not have any
effect on the film.

Checking battery condition

1. No battery symbol in LCD:
Batteries good.
2. One half of battery symbol black:
Enough power left for a few more
rolls of film, but keep spare
batteries ready.
3. Blinking battery symbol:
Replace batteries.
Notes
• Switch the camera off before exchanging batteries.
• Keep spare batteries ready when shooting at low
temperatures that result in a drop in battery power.
Batteries that fail in the cold will recover at normal
temperature.
45