Technical Data - Leuze electronic OGS 600 CN-M12-Serie Bedienungsanleitung

EN

Technical data

NOTE
Technical data
 Additional specifications and notices for using the device can be found in the
operating instructions.
Operating voltage
Average current consumption
Integrated LED illumination
Transmitter/receiver
Sensor field width
Distance between sensor and floor
Measurement time
Linearity error
Measurement value resolution
Guide trace width
Guide trace color
Branches
Interface type
Switching inputs/outputs
Degree of protection
VDE protection class
Housing
Optics cover
Weight
Ambient temp. (operation/storage)
Rel. air humidity
Standards applied
Conformity
1) Protective Extra Low Voltage (PELV) - protective extra-low voltage.
2) Only with screwed-on M12 connectors or mounted caps
20
18 ... 30VDC (PELV
Approx. 180 mA at 24 V DC
(no load at switching output)
Red, wavelength 634nm, risk group 0
(exempt group) in acc. with EN 62471:2008
49 transmitter and 49 receiver elements
OGS 600-280/... 300mm
OGS 600-140/... 150mm
10 ... 70mm,
Nominal:
Optimal:
10ms
Typ. 5mm (at a sensor-floor distance of 30mm)
Typ. 1mm (at a sensor-floor distance of 30mm)
Ideally 40mm, at least 10mm
Light trace on dark floor,
Dark trace on light floor,
See operating instructions for information on contrast
Switch filter, see operating instructions
OGS 600-.../CN... CANopen and RS232
OGS 600-.../D3... RS485
OGS 600-.../D2... RS422
1 switching output (all OGS 600s),
1 configurable switching input/output
(only OGS 600s with RS485 or RS422)
IP 65
III
Diecast aluminum
Polycarbonate
OGS 600-280/... Approx. 405g
OGS 600-140/... Approx. 245g
-15°C ... +50°C / -30°C ... +60°C
Max. 90% (non-condensing)
EN 60947-5-2:2007+A1:2012
CE
1)
, Class 2)
30mm
20 ... 40mm
2)