Seav BeWeather-Serie Bedienungsanleitung Seite 10

BeWeather Electronic Control Unit
GB
An electronic control unit integrated into the Wind, Sun and Rain Sensor
compartment, for the automation of sun blinds and rolling window shutters,
with the possibility of radio control operation for individual and/or central-
ised control.
- Mod. (BeWeather 306):
- Mod. (BeWeather 330):
- Mod. (BeWeather 418):
- Mod. BeWeather 433:
- Mod. BeWeather 433 SET:
- Mod. BeWeather 868:
( ) Product intended for those countries where its use is permitted.
-
for the user important
- The device should not be used by children
or by individuals with reduced physical or
psychological abilities unless supervision
is provided or instruction given on how to
operate it.
- Do not let children play with the device;
keep radio controls out of their reach.
- CAUTION: Keep this instruction manual
in a safe place and adhere to the impor-
306 MHz
- Examine the system frequently to check
330 MHz
418 MHz
433,92 MHz
"Narrow Band" 433,92 MHz
"Narrow Band" 868,3 MHz
warning
the casing to be opened (such as wire
connection, programming, etc.) must be
carried out during installation, by skilled
staff only. For any other procedure which
requires the casing to be opened again
(re-programming, repairs or site modi-
fications), please contact the technical
assistance service.
for the installer
-
10
tant safety instructions contained within
it. Non-adherence to these instructions
may lead to property damage and seri-
ous accidents.
for any signs of damage. Do not use the
device if it needs to be repaired.
: All operations which require
–
important
The BeWeather control unit must be per-
manently connected to the power supply