Grundig VCP 8931 Bedienungsanleitung Seite 25

TROUBLESHOOTING_ _______________________
Common failure
The vacuum doesn't work
Suction is too weak
Different motor operation sound
Vacuum cleaner in trouble at work
Product can not be charged
The red light flicker
The red light flash
The red and white light trading
flash when the discharge process
The red and white light trading
flash when the charge process
Possible cause
Product is power off or battery
is low
Product suction port is blocked.
Dust barrel & filter assembly is
dusty
Rolling brush is wrapped around
the hair and other objects
Situation still remains
The aluminum tube is blocked
Situation still remains
Too many obstacles in the
cleaning area
Product suction port is blocked
Situation still remains
Battery pack and charger
interface not connected well
Charger or receptacle is not fully
charged or loose
Situation still remains
Product is power off or battery
is low
Brush plugging and the main
brush motor is working
Overcharging current is too lager
The battery pack has a problem
The battery pack is not installed
well
Solutions
Please charge the product before
use
Cleaning product suction mouth
Clean the dustbin and filter
material
Clean roller brush
Please contact with our after sales
team
Clean up the obstacles
Please contact with our after sales
team
Manually remove obstacles
Clean product suction mouth
Please contact with our after sales
team
Please check and contact well
Check it and put away
Please contact with us
Please charge the product before
use
Clean roller brush
Change the correct adapter
Please contact with our after sales
team
1- Remove adapter
2- Installed the battery pack
again
3- Insert adapter
4- Strictly follow the above steps
ENGLISH
25