axing SKS 40-00 Betriebsanleitung Seite 17

Warnings
 Assembly, installation, and service must be carried out by authorized and skilled electricians.
 Switch off facility operating voltage or pull out mains plug before starting assembly or service work.
 Installation:
In dust-free, dry environment, protected against humidity, vapors, splash water, and moisture.
In a location protected against solar radiation. Not within close distance to heat sources.
At ambient temperature <50°C.
Do not mount to combustible or highly flammable materials.
 Ensure sufficient ventilation of the device. Do not cover the ventilation slots! - Prevent short circuits!
 Any damage arising from incorrect connection and/or improper operation is excluded from any liability.
 Please observe all relevant standards, regulations, and guidelines regarding installation and operation of
antenna facilities.
 The antenna system must be installed and grounded according to the current DIN EN 60728-11 standard.
 Do not carry out any installation and service work during thunderstorms.
2015-12-02 | © AXING AG Switzerland | Subject to change in design and type; errors and misprints reserved 3