Sony PMW-200 Handbuch Seite 3

Note
Allows recording of 48 kHz 16-bit LPCM 2-channel lock audio
signal only. If other audio signals are input, a silent signal will be
recorded.
Adjusting the Brightness of the EVF Screen
The default value of EVF > Brightness in the LCD/VF SET menu
has changed from ±0 to +30.
Selecting AUDIO IN Reference Input Level
• The default value of Audio Input > EXT MIC CH1 Ref in the
AUDIO SET menu has changed from -40 dB to -60 dB.
• The default value of Audio Input > EXT MIC CH2 Ref in the
AUDIO SET menu has changed from -40 dB to -60 dB.
External Device Connector
A message will be displayed if a USB device which is not
supported by this unit has been connected.
Auto Focus
Auto focus performance is improved.
• Focus instability near the focal point has been reduced.
• Focus instability with a high-luminance background has been
reduced.
Auto Knee
Auto Knee performance is improved.
• Emphasis of white for an object with a high-luminance
background has been reduced.
ATW
ATW performance is improved.
• When ATW mode is set to Natural, automatic adjustment for
wider brightness range when shooting outdoors is available.
Matrix Adjustment
Picture quality for when PICTURE PROFILE SET > Matrix > Setting
> Off is set has been improved.
Major functions updated with V1.1
There is a possibility that the flange focal length might deviate
from the position you have set, when the camcorder is updated
to V1.1. To avoid this, adjust the flange focal length with "Auto FB
Adjust" in the CAMERA SET menu, after the camcorder has been
updated to V1.1.
Wi-Fi remote commander
• Lens controls, white balance, recording, playback, etc., can be
controlled by the browser of the Wi-Fi connected device.
• The Wi-Fi remote commander can be turned On/Off by "Wi-Fi
Remote" in "Wi-Fi" in the OTHERS menu.
Notes
• Mounting an optional CBK-WA01 Wi-Fi adapter is required.
• This function is not guaranteed for all Wi-Fi compatible devices.
Contact the device supplier for more information.
• The device's response time may become extremely slow when
you control the camcorder via the Wi-Fi remote commander for
a long time. In this case, refresh the browser on the device. If
there is no improvement, use the device to make the Wi-Fi
connection again between the camcorder and the device.
Audio Inputs/Outputs
• For the setting items of "Line Input Ref" in "Audio Input" in the
AUDIO SET menu, the reference input level (+4dB/0dB/
-3dB/EBUL) can be set when the AUDIO IN CH-1/CH-2
connectors are set to LINE.
• For the setting items of "Reference level" in "Audio Input" in the
AUDIO SET menu, the 1kHz test signal output level (-20dB/
-18dB/-16dB/-12dB/EBUL) can be set.
Steady Shot
"Steady Shot" can be assigned to Assign Button <1> to <5> in the
OTHERS menu. You can turn the Steady Shot function on/off with
the ASSIGN button.
Setting Values
The menu settings can be stored/retrieved on a USB flash drive.
• The setting values can be stored to a USB flash drive by "All Save
(USB)" in "Camera Data" in the OTHERS menu.
• The setting values can be retrieved from a USB flash drive by "All
Load (USB)" in "Camera Data" in the OTHERS menu.
Flange focal length
The flange focal length can be adjusted by "Auto FB Adjust" in
"CAMERA SET. "
Note
A subject, such as a flange focal length adjustment chart, is
required.
Peaking
The peaking function is improved.
Auto Focus Operation
Auto focus performance is improved.
Français
Note de publication
Principales fonctions mises à jour dans la V1.32
La longueur focale de collerette peut être modifiée lors de
l'installation de cette version V1.1 ou d'une version antérieure.
Nous vous recommandons de régler la longueur focale de
collerette (« Auto FB Adjust » du menu CAMERA SET) après
l'installation de cette version.
Fonction de correction de l'aberration
La fonction de correction de l'aberration a été améliorée.
Principales fonctions mises à jour dans la V1.3
La longueur focale de collerette peut être modifiée lors de
l'installation de cette version V1.1 ou d'une version antérieure.
Nous vous recommandons de régler la longueur focale de
collerette (« Auto FB Adjust » du menu CAMERA SET) après
l'installation de cette version.
Adaptateur sans fil
Le PMW-200/EX280 est compatible avec l'adaptateur sans fil
CBK-WA100 en option.
• Vous pouvez régler « SDI Rec Control » du menu VIDEO SET sur
« Parallel Rec » afin d'autoriser l'enregistrement synchronisé.
• Vous pouvez activer la fonction de nom de plan correspondant
tout en activant/désactivant l'enregistrement synchronisé sous
« Match Clip Name » du menu VIDEO SET.
• Vous pouvez activer/désactiver l'indication d'état sans fil de
l'adaptateur sans fil dans « Wireless Status » sous « Display On/
Off » du menu LCD/VF SET.
• Vous pouvez activer/désactiver l'indication de temps restant
pour une carte SD insérée dans l'adaptateur sans fil dans « Ext
Media Remain » sous « Display On/Off » du menu LCD/VF SET.
• Vous pouvez activer/désactiver l'indication d'état d'envoi du
plan via l'adaptateur sans fil dans « Sending Clip Info » sous
« Display On/Off » du menu LCD/VF SET.