Gearbox With Motorflange - Sumitomo Servo 6000 Betriebsanleitung

Servo 100 & 6000 Operating Manual

6.5 Gearbox with Motorflange

Tightening torque of screws with locking ring:
Tightening Torque
M
A
[Nm]
* Quality class 8.8
When mounting the backlash-free connection of motor shaft with Servo 100& 6000 input shaft, please
make sure that the motor shaft is dry and grease-free. The locking ring is configured such as to allow
the nominal torques of the gearboxes and the maximum accelerating torques to be transmitted reliably.
However, when the maximum permitted torques for EMERGENCY STOP will be used, a key on the
motor shaft is required on the following gearboxes, depending on the motor shaft diameter and gear
transmission:
Page 6
Width across flats of hexagon*
socket **screw DIN 6912 [mm]
4 5
5,5 9,6
Motor shaft
11
diameter
6 106
9 106
11 108
12 108
14 108/110
16 108/110
19 110/111
24 111
28 111
Issue: 02/2007
6 8
23,0 46,0
Ratio
17 9
Gearbox size
106
108
110 110
110 110
110/111 111
111
111
SERVO_DEU_ENG_02_2007_999044
10
79
43
111