Sanus XF228 Montageanleitung Seite 10

3
Attach Arm to Wall Plate
3-1
Align the holes
3-2
Secure the arm
[22]
4
Attach your TV to the Arm
4-1
Position the arm
(T)
[03]
4-2
Attach TV to the arm
[02]
[03]
(L)
10
Install the arm assembly [03] into the wall plate [01]. The pegs on the top of the arm
assembly fi t into the slots of the upper sliding car. Be sure to align the bottom holes
of the arm assembly with the holes in the lower sliding car.
[01]
[03]
[01]
Secure the arm [03] to the wall plate [01] using hex key [29] and screw [22].
Position arms [03] so one elbow is pressed against the wall. Tighten
the tension adjustment (T) to prevent the arms from moving while
installing the TV bracket.
[01]
[03]
HEAVY! You will need assistance with this step.
Attach the TV bracket [02] to the arm assembly [03]. There is an
audible click when the parts are correctly assembled.
[01]
[03]
[29]
[22]
6901-002115 <05>