System Settings - ZAMEL VP-808B Bedienungsanleitung

DISPLAY MICROPHONE MONITORING
With the display in standby, touch and hold
microphone of another display in the voice entry phone system. If you have more
than 2 displays in the video entry phone system, choose the display you wish to
listen to by touching or
Note:
a) The user of the display that is listening will hear everything that the microphone of
the display being listened to captures. The display being listened to will not output
the sounds captured by the microphone of the display which is listening.
b) If you have more than 2 displays in the video entry phone system, verify that the
remote listening mode is enabled in the display you want to listen to. Go to
System Settings and verify that Can Be Monitored is set to Enable.
MANUAL AUDIO RECORDING
Touch on the main screen; next, touch
Touch again to stop recording. The recorded files are listed in the Messages
menu .
SNAPSHOT CAPTURE
Manual capturing: Touch when displaying a video feed from an entrance
panel or monitoring a video feed. A snapshot of the video frame will be captured.
The display will message IMAGE CAPTURED.
Automatic capture: To have the display automatically capture snapshots, set the
AUTO CAPTURE QUANTITY in the System Settings to 1, 2 or 3. The display
system will then capture and save the set number of video snapshots to the
microSD card when a call is made with an entrance panel.

SYSTEM SETTINGS

With the display in standby, touch
touch .
to start listening through the
and confirm with .
to record an audio sequence.
and open the System Settings menu. Next,
12