System Settings - ZAMEL VP-807B Bedienungsanleitung

SYSTEM SETTINGS

With the display in standby, touch and open the System Settings menu.
Item System functions Options
1 LANGUAGE Default setting: PL (Polish) (optional: EN for English).
2 RING TIME Default setting: 30 s (10 to 60 s, adjustable in 5 s steps).
Default setting: 0.7, adjustable in a 01-10 range. (00) mutes the
3 RING VOLUME
sound.
The mode is disabled by default during a call from an entrance
DO NOT DISTURB
4 panel, display-to-display intercom (internal) calls and the public
MODE
address mode. The LED will flash if this mode is enabled.
The mode is disabled by default. The monitoring of remote display
5 MONITORING
microphones can be enabled in the System Settings.
Touch to unlock the electric strike linked to the entrance panel.
6 MONITOR UNLOCK
Touch and hold to open the gate linked to the entrance panel.
Choose ROOM 1 on the display that should
be the main (master) display of the system.
7 DEVICE ADDRESS Room 1/2/3/4 The setting will be yellow if the same device
address is set in two displays in the video
entry phone system.
Default setting: 01;
Door 1 Ring Type
options: 01-13
Default setting: 02;
8 RING TYPE Door 2 Ring Type
options: 01-13
Intercom Default setting: 03;
Ring Type options: 01-13
ENABLED The ringtone will sound repeatedly.
9 RING REPEAT
DISABLED The ringtone will sound once.
10 PORT STATE None / CCTV1 / CCTV1&2
RESTORE
11 Restores the display unit settings to default values.
DEFAULT
10
Notes