Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LEAVE MESSAGE MODE
The mode allows each visitor to leave a voice message with the entrance panel
when no one answers the call. Activate the mode by setting AUTO LEAVING
MESSAGE to Enable in the System Settings. When the Leave Message mode is
active, the caller at an entrance panel will hear a recorded Out-of-Home Reply if
they press the Call button and the call chime ends unanswered. The Out-of-Home
Reply playback will end with a tone after which the visitor may leave a voice
message. The voice message recording time is limited to 20 seconds. The entrance
panel will revert to the standby mode after this time is counted down. The default
Out-of-Home Reply can be replaced with a custom one you can record on the
microSD card.
Item
System functions
Options
Selects the
1
LANGUAGE
display interface
language.
ENABLE
2
DO NOT DISTURB
DISABLE
ENABLE
CAN BE
3
MONITORED
DISABLE
ENABLE
4
OPENING
DISABLED
5
PORT STATE
None / CCTV1 / CCTV1&2
6
DEVICE ADDRESS
Room 1/2/3/4
RESTORE
7
SETTINGS
ENABLED
DEFAULT
8
FORMAT FLASH
ENABLED
9
FORMAT SD CARD ENABLED
COPY FILE TO SD
10
ENABLED
CARD
Notes
Choose the language: PL, EN, DE, FR, RU
The LED will flash if this mode is enabled.
The mode is disabled by default during a call from
an entrance panel, display-to-display intercom
(internal) calls and the public address mode.
This display can be monitored (listened to) by
other displays in the video entry phone system
if this option is set to ENABLE.
The mode is disabled by default.
Click the
button to unlock the latch. Press
and hold the
button to open the gate.
When this function is disabled, touching
followed by
will open the door or the gate
linked to the entrance panel.
Choose ROOM 1 on the display that should be
the main (master) display of the system. The
setting will be yellow if the same device address
is set in two displays in the video entry phone
system.
Restores the default factory settings of this
display.
Formats the embedded flash memory of this
display.
Formats the microSD card installed in the display.
Copies all files from the embedded flash memory
to the microSD card in the display.
13
Werbung
Inhaltsverzeichnis
