Cleaning And Maintenance - Futurelight 300 Bedienungsanleitung

Control-channel 5 - Gobo rotation
Decimal Hexad. Percentage
0 3 00 03 0% 1%
4 135 04 87 2% 53%
136 255 88 FF 53% 100%
Control-channel 6 - Shutter, Strobe
Decimal Hexad. Percentage
0 128 00 80 0% 50%
129 133 81 85 51% 52%
134 243 86 F3 53% 95%
244 249 F4 F9 96% 98%
250 255 FA FF 98% 100%
Control-channel 7 - Focus
Decimal Hexad. Percentage
0 255 00 FF 0% 100%
Control-channel 8 - Prism
Decimal Hexad. Percentage
0 27 00 1B 0% 11%
28 128 1C 80 11% 50%
129 191 81 BF 51% 75%
192 255 C0 FF 75% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
S/F
S No rotation
F Forwards gobo rotation with increasing speed
F Backwards gobo rotation with increasing speed
S/F
F Gradual adjustment of the dimmer intensity from 0 to 100 %
S No function (Shutter open)
F Random strobe effect with decreasing speed
S Reset (after 3-5 seconds)
S No function (Shutter open)
S/F
F Continuous adjustment from near to far
S/F
S No function
S 3-facet-prism
F Forwards rotation 3-facet-prism with increasing speed
F Backwards rotation 3-facet-prism with increasing speed
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
Feature
Feature
31/63 00030934.DOC, Version 1.3