Description Of The Device; Features - Futurelight 300 Bedienungsanleitung

The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

DJ-scanner with rotating gobos and 3-facet-prism
• 6 different, dichroic colour-filtres, UV-filter and white
• Rainbow-effect with adjustable speed in both directions
• Gobo-wheel with 7 rotating gobos and open
• Strobe-effect with adjustable speed via shutter
• DMX-controlled operation or stand alone operation with Master/Slave-function
• With 3-facet-prism rotating in both directions and at different speeds
• Sound-controlled via built-in microphone
• Control-Board with LCD-display and encoder for adjusting the DMX-starting address, Pan/Tilt-Reverse
• Motorized focus
• Blackout-socket
• For MSD/HSD 250 or MSD 250/2 lamp
• DMX-control via every standard DMX-controller
22/63 00030934.DOC, Version 1.3