Herunterladen
Teilen
Diese Seite drucken
Interlogix GS330 Installationsanleitung
  1. Anleitungen
  2. Marken
  3. Interlogix Anleitungen
  4. Relais
  5. GS330
  6. Installationsanleitung
Interlogix GS330 Installationsanleitung

Interlogix GS330 Installationsanleitung

Vorschau ausblenden
1
2
3
4
5
6
7
8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 2

Quicklinks

Diese Anleitung herunterladen
GS330 Relay Interface Installation Sheet
EN DE ES FR
IT
SV
1
(5)
(8)
(9)
(10)
2
26
EN: Installation Sheet
Description
GS330 relay interface is necessary if the alarm zone does not
allow connecting glass break detectors. This may happen
because of several reasons: serial connection technology,
digital supervision, or zone voltage below 3 V.
As a connecting link between a glass break detector and the
panel, the relay interface can be connected in each loop
because of its floating relay contact.
The electronic is placed in a plastic case. It allows the lead in
of wire on three sides. The housing cover is monitored against
unauthorized opening by a tamper switch.
© 2019 UTC Fire & Security Americas Corporation, Inc.
GS330
(1)
(2)
1 2 3
4 5 6
8
7
9
+ -
(6)
(11)
85
(3)
(4)
10
(7)
The supplied VdS stickers make it possible to identify an
unauthorized opening of the housing. After the mounting they
are fixed over the cover screw and then the sticker cannot be
removed without damage.
The relay interface is assembled in up-to-date SMD
technology, meets the VdS regulations according to class B
and passes all required EMV testing.
The alarm contact of the relay interface is normally closed if
the power supply (12 V) is connected, the end of line resistor
(2.2 kΩ) is connected, and the connected detectors are not
triggered.
If one of these items is not in normal condition, the alarm
contact opens.
The value of the monitoring resistor must be 2.2 kΩ (1%).
The triggering (opening of the alarm contacts) happens after a
change of maximum 38% of the detector line resistance. The
disturbance must be longer than 100 ms.
1 / 8
(4)
(4)
2k2
(12)
P/N 1078286 (ML) • REV B • ISS 11MAR19

Werbung

loading

Verwandte Anleitungen für Interlogix GS330

Inhaltszusammenfassung für Interlogix GS330

  • Seite 1 The triggering (opening of the alarm contacts) happens after a change of maximum 38% of the detector line resistance. The GS330 relay interface is necessary if the alarm zone does not disturbance must be longer than 100 ms. allow connecting glass break detectors. This may happen because of several reasons: serial connection technology, digital supervision, or zone voltage below 3 V.
  • Seite 2 For more information see: www.utcfssecurityproducts.eu/recycle/ Specifications Contact information Power supply 10 to 15 V www.utcfireandsecurity.com or www.interlogix.com Operating current about 5.0 mA (at 12 V) For customer support, see www.utcfssecurityproducts.eu Current in alarm 13.5 mA max. (at 12 V) End of line resistor 2.2 kΩ...
  • Seite 3 UTC Fire & Security B.V. Kelvinstraat 7, 6003 DH Weert, Niederlande Descripción La interfaz de relés GS330 es necesaria si la zona de alarma no permite conectar detectores de rotura de cristal. Esto podría deberse a distintos motivos: tecnología de conexión en serie, supervisión digital o una tensión de zona inferior a 3 V.
  • Seite 4 −30 a +60°C Intervalo de temperatura de Description trabajo L'interface de relais GS330 est nécessaire si la zone d'alarme Protección de tamper Tapa del interruptor ne permet pas la connexion de détecteurs de bris de vitre. Blanco o marrón...

  • Seite 5: Spécifications Techniques

    Tension de la boucle avec 2,2 kΩ Informations de contact Niveau de réponse environ +/− 38 % de la résistance de fin de ligne www.utcfireandsecurity.com ou www.interlogix.com Délai de réponse 100 ms max. Pour contacter l'assistance clientèle, voir Relais électronique www.utcfssecurityproducts.fr/mail_support.htm...

  • Seite 6: It: Istruzioni Per L'installazione

    24 V max. Alimentazione di commutazione 0,3 W (max) L'interfaccia del relè GS330 è necessaria nel caso in cui la circa 5 Ω Resistenza di contatto zona di allarme non consenta il collegamento dei rilevatori di rottura vetro. Questa situazione può verificarsi per diverse 0,02 Ω/°C max.
  • Seite 7 10 nF Flytande gräns 50 V Beskrivning Arbetstemperaturområde -30 till +60 °C Kontrollenheten GS330 är nödvändig om inbrottscentralen inte Kåpans brytare Kapslingssabotage tillåter anslutning av glaskrossdetektorer. Detta kan bero på Färg Vit eller brun flera skäl: seriell anslutningsteknik, digital övervakning, eller Mått...
  • Seite 8 P/N 1078286 (ML) • REV B • ISS 11MAR19 8 / 8...