Cocraft HT 10 Original Bedienungsanleitung Seite 7

Safety instructions for handling saw blades
1. Only use tools which you know how to handle.
2. Pay attention to the maximum speed. The maximum speed stated on the tool being used must not be exceeded. Keep
within the speed range if one is specified
3. Note the direction of rotation of the motor and saw blade.
4. Do not use a cracked saw blade. Never attempt to repair a cracked saw blade. Damaged blades must be replaced.
5. Do not use any loose reducing rings or bushes to reduce the size of arbor holes on circular saw blades.
6. Handle saw blades with care. It is best to store them in their original packaging or special containers. Always wear
protective gloves to improve your grip and further reduce the risk of injury.
7. Make sure that all safety devices are fitted correctly before installing the saw blade.
8. Make sure that the saw blade fulfills the technical specifications and is correctly fitted.
9. The saw blade supplied should only be used for sawing wood, never for sawing metal.
10. Always select the correct saw blade for the material to be cut.
11. Make sure that the diameter of the saw blade corresponds to the specifications of the saw.
12. Use only saw blades that are marked with an equal or higher rotation speed than that marked on the saw.
13. Use only saw blades recommended by the manufacturer which conform to EN 847-1, if intended for cutting wood or
similar materials.
14. Wear suitable personal protective equipment, such as:
- hearing protection
- protective gloves when handling saw blades.
15. WARNING: When changing the saw blade, make sure that the Kerf of the blade is not less than the thickness of
the riving knife and that the thickness of the blade is not greater than the thickness of the riving knife.
16. When sawing wood and plastics, avoid overheating the saw teeth. Reduce the feed speed to avoid the plastic melting.
Residual risks
This table saw has been constructed in accordance with the latest technology and generally recognised safety
regulations. Nevertheless, hazardous situations cannot be ruled out during operation.
• There is a risk of electric shock if unsuitable electrical equipment is used to connect the saw to the power supply.
• In addition, concealed residual risks may be present in spite of all the precautions that have been taken.
• Residual risks can be minimised by observing the safety warnings and by using the table saw for the correct purpose
and in the manner described in this instruction manual.
• Excessive feed speed and force on the workpiece during sawing will quickly damage the saw blade. This may result in
a reduction in the performance of the machine, as well as a reduction in the cutting accuracy.
• Avoid switching the machine on by accident: the power button must not be pressed in when the plug is inserted into
the wall socket
• Use the saw blade which is recommended in this manual. This will ensure the optimal performance of your saw.
• Keep your hands away from the working area when the machine is in operation.
• Before you carry out any adjustments or servicing work, turn the device off and remove the mains plug.
7