Programming And Data Collection; Programming; Safety Codes; Programming With Unico Software - Comestero Group WorldKey UltraLite Betriebshandbuch

7. Programming and data collection

7.1 Programming

UNICO software, the Programming key and the Clone Programming key are used to
program the WorldKey UltraLite. UNICO CARD software is used to manage the media
(keys and tags). WorldKey UltraLite can be connected to a PC which has UNICO
software installed on it by means of the USB port. The device is also powered through
the USB port.

7.1.1 Safety codes

A safety code is required to access device configuration and to read or modify the
entered data. There are 3 configuration levels which can be accessed through 3
different code sto manage different privilege/access levels.
1. 1. 1. 1. Ad Administrator Ad Ad ministrator code ministrator ministrator code code: numerical code which identifies a single administrator and code
allows access to all machines in all rentals managed by him.
2. 2. 2. 2. Rental code Rental code Rental code Rental code: numerical code which identifies a single area managed by a single
administrator.
3. 3. 3. 3. Access Access code code: numerical code which identifies a subarea in a single rental managed
Access Access code code
by a single administrator.
When leaving the factory, all codes of each device consist in a sequence of zeros.
These codes must be modified before activating the devices to prevent tampering or
frauds.
N N N N .B. .B. .B.: : : : .B.
The safety codes are necessary to access device configuration The safety codes are necessary to access device configuration. . . . If they are lost,
The safety codes are necessary to access device configuration The safety codes are necessary to access device configuration
they cannot be recovered and the device must be reset completely. they cannot be recovered and the device must be reset completely. they cannot be recovered and the device must be reset completely. they cannot be recovered and the device must be reset completely.
recommended to write down the safety recommended to write down the safety codes and keep them in a safe place.
recommended to write down the safety recommended to write down the safety

7.1.2 Programming with UNICO software

The use of UNICO software is described in detail in the specific manual.

7.1.3 Programming key

The programming key is a special contactless key with an anthracite coloured cap and
a red body. This key can program the operating parameters of many of the World Key
devices. The data on this key is formatted according to the type of operation requested
through the UNICO program. The subsequent programming of the system takes place
simply and quickly by inserting the key in the reading head. The presence of the CVS
signalling LEDs guides the user through the exact programming sequence of the
device parameters. The key is delivered without the application or th The key is delivered without the application or the safety codes;
The key is delivered without the application or th The key is delivered without the application or th
for use, plea for use, plea for use, plea for use, please se se se refer to the UNICO software guide. refer to the UNICO software guide. refer to the UNICO software guide. refer to the UNICO software guide.
codes and keep them in a safe place.
codes and keep them in a safe place. codes and keep them in a safe place.
EN
If they are lost,
If they are lost, If they are lost,
It is therefore It is therefore It is therefore It is therefore
e safety codes;
e safety codes; e safety codes;
31