Fluke Networks SimpliFiber Pro Bedienungsanleitung Seite 4

SimpliFiber Pro Users Guide
To prevent possible fire, electric shock, or personal
injury:

Read all safety information before you use the
Product.

Carefully read all instructions.

Do not open the case. You cannot repair or
replace parts in the case.

Do not modify the Product.

Use only replacement parts that are approved
by Fluke Networks.

Do not use the Product around explosive gas,
vapor, or in damp or wet environments.

Use this Product indoors only.

Use the Product only as specified, or the
protection supplied by the Product can be
compromised.

Do not use and disable the Product if it is
damaged.

Do not use the Product if it operates incorrectly.

Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to
chemicals occurs, clean with water and get
medical aid.

Remove the batteries if the Product is not used
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are
not removed, battery leakage can damage the
Product.

The battery door must be closed and locked
before you operate the Product.

Repair the Product before use if the battery
leaks.

Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.

Be sure that the battery polarity is correct to
prevent battery leakage.

Do not disassemble or crush battery cells and
battery packs.
2

Warning
