Inhaltsverzeichnis
Werbung
Important EMC notices for use in medical environments
• The AC-81MD/82MD needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided in the instructions for use.
• The AC-81MD/82MD is intended for use in a professional healthcare facility environment.
• Portable and mobile RF communications equipment, such as cellular phones, can affect the
AC-81MD/82MD.
Warning
• Portable RF communications equipment should be used no closer than 30 cm (12 inches) to
any part of the AC-81MD/82MD. Otherwise, degradation of the performance of this
equipment could result.
• If the AC-81MD/82MD will be used adjacent to or stacked with other equipment, normal
operation of the AC-81MD/82MD under such configurations should be verified via
observation.
• The use of accessories and cables other than those specified, with the exception of
replacement parts sold by Sony Corporation, may result in increased emissions or decreased
immunity of the AC-81MD/82MD.
Guidance and manufacturer's declaration – electromagnetic emissions
The AC-81MD/82MD is intended for use in the electromagnetic environment specified below.
The customer or the user of the AC-81MD/82MD should assure that it is used in such an
environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
6
GB
Compliance
Electromagnetic environment – guidance
The AC-81MD/82MD uses RF energy only
for its internal function. Therefore, its RF
Group 1
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
The AC-81MD/82MD is suitable for use in all
Class B
establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
Class A
domestic purposes.
Complies
Werbung
Inhaltsverzeichnis
