Safety Precautions For Weighing Platforms With Raisable Load Plate; Introduction; Weighing Platforms Of The Pfk9- / K; About This User Manual - Mettler Toledo PFK988 Serie Bedienungsanleitung

6

Introduction

1.4 Safety precautions for weighing platforms with raisable load plate

▲ Do not operate the weighing platforms with raisable load plate outside the temperature
range of –10 °C to +40 °C. Otherwise, the safety of the pneumatic springs is not
guaranteed.
▲ Strictly observe the safety instructions of the operating company.
▲ Only instructed personnel may open/close the weighing platforms with raisable load
plate.
▲ Protect the pneumatic springs against soiling and damage.
▲ Have soiled or damaged pneumatic springs replaced immediately.
▲ Pneumatic springs are spare parts. Use only the spare parts specified by
METTLER TOLEDO.
▲ The weighing platform must be checked to ensure compliance with the safety
requirements before being put into service for the first time, following any service work
and at least every 3 years.
2 Introduction
2.1 Weighing platforms of the PFK9- / K...(x-T4)-series
This user manual focuses on the products listed below.
The PFK9- / K...(x-T4)-series offer a variety of weighing platforms to fit your requirements.
Each type is available
• in various sizes and capacities,
• as approved or non-approved version.
Type Material
PFK988 Hot-galvanized
PFK989 Stainless steel
K...x-T4 Painted
K...sx-T4
Hot-galvanized
K... Power coated
K...s Stainless steel

2.2 About this user manual

This user manual contains all information for the operator of the weighing platforms of the
PFK9- / K...(x-T4)-series.
➜ Read this User manual carefully before use.
➜ Keep this User manual for future reference.
➜ Pass this User manual to any future owner or user of the product.
Raisable
load plate Environment
– Dry
Sizes E / ES Wet
– Dry
Sizes E/ES Light wet
Dry
–
Wet
Ex approval
Options for
Category 3 / Division 2
Category 2 / Division 1
Standard approval:
Category 2 / Division 1
Standard approval:
Category 3
PFK9- / K...(x-T4)-series 30233051D