Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
iCMPDA1
3B
C
8
3C
8
(M, Q) x4
E x2
(L, M, P, Q) x 4
8
E x2
6
M x 4
N x 4
14
100x200mm
R x4
(M, Q) x4
200x200mm
R x4
200x300mm
R x 4
N x 4
C
100x200mm, 200x200mm, 200x300mm Mounting
Hole Pattern
1.
Lay display face down on protective surface.
CAUTION:
Using screws of improper diameter may damage
your display! Proper screws will easily thread into display
mounting holes.
2.
Select 4mm (L, M) or 6mm (P, Q) diameter screws by
examining size of display mounting holes.
3.
Select washers:
•
If using 4mm diameter screws, then use washers (N).
•
If using 6mm diameter screws, then no washers are
required.
4.
Select bracket(s):
•
For 100x200 display mounting pattern use bracket (C).
•
For 200x200 display mounting pattern use brackets (E).
•
For 200x300 display mounting pattern use brackets (E)
and (C).
5.
Select spacers:
•
If using bracket (C), then use spacers (R), if needed.
•
If using brackets (E) AND display mounting holes are not
recessed, then no spacers are required.
•
If using brackets (E) AND display mounting holes are
recessed, then use spacers (R), if needed.
6.
For 200x300mm display mounting pattern:
•
Use four M4 x 10mm Phillips head screws (M) and four
M4 flat washers (N) to attach bracket (C) to brackets (E).
CAUTION:
Using screws of improper length may damage
your display! Proper screws will have adequate thread
engagement without contacting bottom of display mounting
holes.
7.
Select screw length:
•
If using spacers (R), then use 20mm length screws
(M, Q; as required).
•
If NOT using spacers (R), then use 10mm length screws
(L, P; as required).
8.
Carefully install selected screws (L, M, P, Q; as required)
through washers (N, if required), brackets (C, E; as required),
and spacers (R, if required) into display. Do not overtighten
screws!
9.
Proceed to Step 3C.
Installation Instructions
Werbung
Inhaltsverzeichnis
