IC iCMPDA1 Installationsanleitung Seite 13

Installation Instructions
3
INSTALL DISPLAY
IMPORTANT!
• If installing a Panasonic 26" (660mm) or 32" (813mm) display, then proceed to Step 3A.
• If installing a display with a 100x200mm, 200x200mm or 200x300mm mounting hole pattern, then
proceed to Step 3B.
• If neither of the above situations apply, then proceed to step 3C or 3D, as applicable.
3A
2
3
Proceed as directed below:
E x2
P x4
E x2
L x4
Panasonic 26" (660mm) or
32" (813mm) Display
1. Lay display face down on protective surface.
2. Install 4 screws (P) through brackets (E) to plate
(C). Tighten securely.
CAUTION:
USING SCREWS OF IMPROPER
SIZE CAN DAMAGE DISPLAY! Screws should
easily and completely thread into display
mounting holes.
C
3. Install 4 screws (L) through brackets (E) to display.
Do not overtighten screws!
4. Proceed to Step 3C.
iCMPDA1
13