Care And Maintenance - Emos T3 Handbuch

Care and maintenance

The product is designed to provide trouble-free service for many years if operated appropriately. Here
is some advice for proper operation:
• Read carefully the manual before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden changes in
temperature (this may compromise detection accuracy).
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
• Do not expose the product to excessive force, impacts, dust, high temperatures, rain or humidity -
these may cause malfunction, damage to batteries and deformation of plastic parts.
• Do not place any open flame sources on the product, e.g. a lit candle, etc.
• Do not place the product to places with inadequate air flow.
• Do not insert any objects in the product vents.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning agents -
they could scratch the plastic parts and cause corrosion of the electric circuits.
• The product may not be exposed to dripping or splashing water. Do not immerse it in water or
other liquids.
• In the event of damage or defect of the product, do not perform any repairs by yourself. Have it
repaired in the shop where you bought it.
This device is not intended for use by persons (including children) whose physical, sensory or mental
disability or lack of experience and expertise prevents safe use, unless they are supervised or instructed
regarding use of the appliance by a person responsible for their safety. It is necessary to supervise
children to ensure they do not play with the appliance.
Do not dispose of the product after the end of its life as unsorted municipal waste, use sorted
waste collection points.
The product was issued a Declaration of Conformity.
CZ
TERMOSTAT T3
Termostat T3 je určen pro kontrolu a regulaci vytápěcího systému. Je vybaven funkcí časového snížení
pokojové teploty „SET-BACK" s opakováním po 24 hodinách. Je to jednoduchý systém ovládání teploty
v určeném prostoru. Termostat je určen pro vnitřní použití. Typickým místem pro jeho umístění jsou
různé obytné části jako kanceláře, školy, obchody, rodinné domy atd.
Technické info
Rozsah teplotní kontroly: 5 °C–30 °C
Maximální spínací zatížení: 7 A odporové, 3 A indukční
Napájení: 230 V AC 50/60 Hz
Časová doba „Set-back": 6 h/denně opakováno
Kontrolní přepínače: MCV kontrolováno spínacím/vypínacím relátkem
Indikace systému: pokud bude funkce „Set-back" aktivní, bude kontrolka svítit zeleně. Jakmile má teplota
v Set-backu klesnout o 5 °C, potom bude svítit oranžově.
Provozní teplota: od 0 °C do 40 °C
Teplota uskladnění: od -20 °C do 60 °C
Rozměry: 97 × 67 × 28 mm
4