Description; Scope; Installation - Vimar 01910 Montageanweisungen

1. DESCRIPTION.

Electronic timer-thermostat for ON/OFF ambient temperature control
(heating and air-conditioning), daily/weekly programming, class I tem-
perature control device (contribution 1%), change-over relay output
5(2) A 250 V~, powered by batteries AA LR6 1.5 V (not supplied),
wall mounting.

2. SCOPE.

The chronothermostat is suitable for ambient temperature control by
regulating the supply circuit of the burner or heat pump (heating), or
the supply circuit of the air conditioner (air conditioning), to maintain
ideal temperature conditions seven days a week.
The large display shows the ambient temperature, day, time, the op-
erating status of the system and the daily temperature profile set for
the current program.
20 - ENGLISH

3. INSTALLATION.

The device must be surface-mounted at a height of 1.5 m from floor
level, in a position suitable for correctly measuring the ambient tem-
perature. Do not install in niches, behind doors and curtains, or in
areas affected by heat sources or outdoor weather.
The base of the device has 4 slots for fastening directly to the wall
with ø 6 mm screws and studs (not included), or for installation in
inset boxes with screws placed 60 mm or 83.5 mm apart (standard
3-module rectangular boxes).
Use in dry, non-dusty environments at a temperature between 0 °C
and +40 °C.