Chapter 3 Time Mode - Suunto ADVIZOR Gebrauchsanweisung

Note: The HRM memory is for one event only. This feature is automatically activated when starting the stopwatch
or countdown timer and will cause the previous event’s information to be erased.
To view the split times and heart rate readings stored in the memory when using the stopwatch, hold the
[Select] button in for 2 seconds when on any of the HRM memory displays.
The display shows the following information (Fig. 15):
• Field 1 displays seconds and tenths of seconds of the stopwatch;
• Field 2 displays your momentaneous heart rate; and
• Field 3 displays hours and minutes of the stopwatch.
Press the [+] button to scroll through the stored split times and heart rate readings.
You can exit the viewing of stored split times and heart rate readings at any time by pressing the [Mode] button.

CHAPTER 3 TIME MODE

The Suunto Wristop Computer watch function provides the user with:
• an adjustable 24/12 hour clock display;
• a calendar pre-programmed to the year 2089;
• three daily alarms; and
• a dual time operation.
To view and use the Time mode function:
Check the Mode Indicator arrow. If the mode arrow is not on TIME, PRESS the [Mode] button until the arrow is
directly below TIME.
In the TIME mode (Fig. 16):
• Field 1 displays the day of the week.
• Field 2 displays the current time.
• Field 3 displays the date (month/day if the 12-hour clock has been chosen; day/month if the 24-hour clock
has been chosen).