Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the USB Driver for Windows
For the Windows driver installation procedure, refer to "Installing the P2 Software"
in the installation manual on the following website.
Installing the USB Driver for Macintosh
For the Macintosh driver installation procedure, refer to "Installing the P2 Software"
in the installation manual on the following website.
NOTE:
• If the USB driver is not installed, a sufficient transfer rate may not be possible.
For the latest information on drivers, visit the following website.
http://pro-av.panasonic.net/
Troubleshooting
„ microP2 cards cannot be accessed after resuming from sleep or hiberna-
tion.
Some personal computers may not be able to access a microP2 card in the
microP2 drive after resuming from sleep or hibernation. Should this happen,
reconnect the USB cable.
E-11
Werbung
Kapitel
Fehlerbehebung
