Installation - Agilent Technologies TwisTorr 74 FS PCB 24 Bedienungshandbuch

16 Instructions for Use

Installation

Installation

WARNING! The controller develops internal voltages that could cause serious injury.
Unplug the controller from the electrical wall outlet before beginning with
any type of installation or maintenance procedure. In addition, the controller
develops internal temperatures that could also cause serious injury.
Adequately protect the controller in it final point of installation so as to avoid
accidental contacts.
When definitively installed in the system, the controller must be positioned so
NOTE
that the cooling air can circulate freely around the equipment. Do not install
and/or use the controller in environments exposed to the atmosphere (rain, ice,
and snow), to dust, to aggressive gases and in explosive areas where there is a
high risk of fire.
The controller must be used within the following environmental
conditions:


168/209
Temperature: 0 °C to +40 °C
Relative humidity: 0 to 95 % (non-condensing).
TwisTorr 74 FS PCB 24 Vdc Controller User Manual / 87-901-056-01